PETG 3D Printed Enclosure for 2xP10 Single Color Through Hole LED Matrix Display – 32x16 Pixels in each display
This enclosure is designed specifically for a 2 x P10 Single Color Through Hole LED Matrix, creating a compact finished housing for your LED display and controller electronics.
Dimensions:
- Space for 2 x P10 Single Color Through Hole LED Matrix, 32x16 pixels
- Approximate display size: 640 × 160mm
- Enclosure: approximately 644 × 164 × 62mm
- 2mm added around every side of the display
- Weight: Less than 0.5kg (1.1lbs)
- Designed for DIY Electronics
Displays are NOT included
There is room inside for a variety of controllers, including:
- BuildCircuits / Scoreduino matrix drivers
- ESP32 matrix drivers
- Arduino UNO
- Arduino Mega
- Other third-party matrix controllers
The power switch and DC barrel socket(5.5x2.1mm) are positioned on the left side.
Magnetic Mounting
Six stainless-steel strips are glued to the internal stand-offs. Magnetic screws installed on the display attach to the strips and hold the LED module securely.
A thin ruler or similar tool can be inserted through the rear ventilation openings when you need to remove the display.
Display magnets/magnetic screws are not included.
Cooling
Rear ventilation openings allow air to circulate through the enclosure and help cool the LED matrix and controller.
PETG Construction
Due to the large size of this enclosure, it cannot be 3D printed as a single piece. The enclosure is therefore printed in two separate sections and permanently joined together using glue. As a result, minor glue marks or stains may be visible along the joining area. These are a normal part of the manufacturing process and do not affect the strength or functionality of the enclosure.
PETG provides a strong, durable material for this type of functional enclosure. It has good impact resistance, strong layer adhesion and better heat resistance than PLA.
The glass-transition temperature of PETG is approximately 80°C. For reliable long-term use, keep the enclosure environment at approximately 70°C or below.
Package includes:
- 1 × PETG enclosure
- 1 x Power switch
- 1 x DC barrel connector (5.5x2.1mm)
- 12 × stainless-steel metal strips
- 2 × 40 × 40 × 4mm wall-mount brackets
- 12 x M4 magnetic screws for the P10- 32x16cm Indoor/outdoor through hole LED Display
2 x P10 through hole displays are not included.
Small layer lines, marks and glue marks are normal characteristics of a 3D printed enclosure. It is not intended to compete with an injection-moulded enclosure in cosmetic perfection; instead, it is designed to work well, hold your electronics securely and give your project a professional finished appearance.
Customization is available. Please contact us before ordering if you require modifications.