Protect and professionally present your 2 x P5 64×32 RGB LED matrix display with this purpose-designed PETG 3D printed enclosure.
Dimensions
- Space for 2 x P5 RGB LED Matrix, 64×32 pixels
- Approximate display size: 640 × 160mm
- Enclosure dimensions: approximately 644 × 164 × 62mm
- 2mm added around each side of the display
- Weight: approximately 0.6kg
Displays are NOT included
The approximately 62 mm depth provides room for electronics and gives the enclosure enough depth to sit firmly on a table.
The enclosure provides useful internal space for:
- ESP32 matrix controllers
- BuildCircuits / Scoreduino display drivers
- Arduino UNO
- Arduino Mega
- Matrix Portal S3
- Other compatible third-party controllers
The power switch and DC barrel(5.5x2.1mm) connector are installed on the right side.
Secure Magnetic Mounting: Six stainless-steel metal strips are glued to the enclosure stand-offs. Magnetic screws fitted to the rear of the P5 display attach to these metal strips.
This allows the display to be installed and removed easily without permanently fixing it to the enclosure.
To remove the display, insert a thin ruler or similar tool through the rear ventilation openings and gently push the display forward.
Magnets/magnetic screws are also included.
Rear Cooling Ventilation
The back of the enclosure has ventilation openings designed to allow air to flow through the enclosure and help remove heat from the display and controller.
PETG 3D Printing
Due to the large size of this enclosure, it cannot be 3D printed as a single piece. The enclosure is therefore printed in two separate sections and permanently joined together using glue. As a result, minor glue marks or stains may be visible along the joining area. These are a normal part of the manufacturing process and do not affect the strength or functionality of the enclosure.
The enclosure is manufactured from PETG, providing a good combination of strength, durability and heat resistance.
PETG offers:
- Good strength
- Excellent toughness
- Good impact resistance
- Strong layer bonding
- Better temperature resistance than PLA
- Good resistance to moisture
- Excellent suitability for functional DIY projects
PETG has a glass-transition temperature of approximately 80°C. For long-term practical use, we recommend maintaining the enclosure environment at approximately 70°C or below.
Please Read Before Buying
This is a 3D printed enclosure, so it will not have the perfectly smooth finish of an injection-moulded enclosure. Small layer marks, minor printing imperfections and glue marks may be present.
However, the enclosure is designed to be functional, strong and presentable, providing a professional-looking home for your DIY LED display project.
Package includes:
1 × PETG enclosure
1 x Power switch
1 x DC barrel connector(5.5x2.1mm)
12 × stainless-steel metal strips
2 × 40 × 40 × 4mm wall-mount brackets
12 x M3 magnetic screws for the 2 x P5 Indoor Displays
P5 RGB LED Matrix Displays are NOT included.
Customization is available. Contact us if you need different dimensions, openings, mounting arrangements or other modifications.