PETG 3D Printed Enclosure for P4 RGB LED Matrix Display – 64×64 Pixels
This enclosure is designed specifically for a P4 64×64 RGB LED matrix, creating a compact finished housing for your LED display and controller electronics.
Dimensions
- Space for P4 RGB LED Matrix, 64×64 pixels
- Approximate display size: 256 × 256mm
- Enclosure: approximately 260 × 260 × 50mm
- 2mm added around every side of the display
- Weight: Less than 0.5kg (1.1lbs)
- Designed for DIY Electronics
Displays are NOT included
There is room inside for a variety of controllers, including:
- BuildCircuits / Scoreduino matrix drivers
- ESP32 matrix drivers
- Arduino UNO
- Arduino Mega
- Adafruit Matrix Portal S3
- Other third-party matrix controllers
The power switch and DC barrel socket are positioned on the left side.
Magnetic Mounting
Six stainless-steel strips are glued to the internal stand-offs. Magnetic screws installed on the display attach to the strips and hold the LED module securely.
A thin ruler or similar tool can be inserted through the rear ventilation openings when you need to remove the display.
Display magnets/magnetic screws are also included.
Cooling
Rear ventilation openings allow air to circulate through the enclosure and help cool the LED matrix and controller.
PETG Construction
PETG provides a strong, durable material for this type of functional enclosure. It has good impact resistance, strong layer adhesion and better heat resistance than PLA.
The glass-transition temperature of PETG is approximately 80°C. For reliable long-term use, keep the enclosure environment at approximately 70°C or below.
Package includes:
- 1 × PETG enclosure
- 1 x Power switch
- 1 x DC barrel connector(5.5x2.1mm)
- 8 × stainless-steel metal strips
- 2 × 40 × 40 × 4mm wall-mount brackets
- 8 x M3 magnetic screws for the P3-64x64 Indoor Display
P4 RGB 64x64 pixels RGB Display is NOT included.
Small layer lines, marks and glue marks are normal characteristics of a 3D printed enclosure. It is not intended to compete with an injection-moulded enclosure in cosmetic perfection; instead, it is designed to work well, hold your electronics securely and give your project a professional finished appearance.
Customization is available. Please contact us before ordering if you require modifications.