A compact and practical enclosure designed for a P3 64×64 RGB LED matrix display. Ideal for clocks, information displays, digital signage, scoreboards, animations, IoT projects and other custom LED projects.
- Space for P3 RGB, 64×64 pixels
- Approximate display dimensions: 192 × 192mm
- Enclosure: approximately 196 × 196 × 50mm
- 2mm added around each side
- Weight: Less than 0.5kg (1.1lbs)
- Displays are NOT included
Features:
- PETG 3D printed construction
- Approximately 50mm enclosure depth
- Internal space for controller electronics
- Left-side power switch
- Left-side DC barrel connector (5.5x2.1mm)
- Rear ventilation
- Magnetic display mounting
- Tabletop-friendly design
- Wall-mount brackets included
The enclosure can accommodate BuildCircuits/Scoreduino drivers, ESP32 matrix controllers, Arduino UNO, Arduino Mega, Matrix Portal S3 and other compatible controllers.
Six stainless-steel metal strips are installed inside the enclosure. Magnetic screws fitted to the display attach to these strips.
Display M3 magnets/magnetic screws are also included.
The enclosure is 3D printed in PETG. Minor layer marks, print imperfections and glue marks can occur. This is a functional handmade/3D-printed product rather than an injection-moulded enclosure, but it provides a clean and professional appearance for your project.
The enclosure is designed to be functional, strong and presentable, providing a professional-looking home for your DIY LED display project.
PETG recommended operating environment: approximately 70°C or below. PETG glass transition temperature is approximately 80°C.
Package includes:
- 1 × PETG enclosure
- 1 x Power switch
- 1 x DC barrel connector(5.5x2.1mm)
- 6 × stainless-steel metal strips
- 2 × 40 × 40 × 4mm wall-mount brackets
- 6 x M3 magnetic screws for the P3-64x64 Indoor Display
P3 RGB 64x64 pixels RGB display is NOT included.
Need a custom modification? Contact us and we will try to design it if it is within our capabilities.