This item is shipped from Sydney, Australia

Check out all our other items in our store: Visit our eBay Store

All RGB Displays are listed on this page: View All RGB Displays

This enclosure is designed for a P4 64×32 pixel RGB LED matrix display, providing a neat housing for the LED module and its controller electronics. It is ideal for DIY digital signage, information displays, counters, scoreboards, clocks, advertising displays and other ESP32/Arduino LED matrix projects.

Dimensions:


The 50mm depth provides a stable enclosure that can sit securely on a table while leaving room for the controller and wiring.

Controller Compatibility

The enclosure has been designed to accommodate:


The power switch and DC barrel connector are positioned on the left side.

Magnetic Mounting System

Six stainless-steel metal strips are attached to the internal stand-offs. Magnetic screws installed on the rear of the display attract to these strips and hold the LED matrix securely inside the enclosure.

The display can be removed without dismantling the entire enclosure. A thin ruler or similar flat tool can be inserted through the rear ventilation openings to gently push the display out.

Magnetic screws/magnets for the display are also included.

Ventilation

Ventilation openings are provided on the rear to promote airflow and help remove heat generated by the LED matrix and controller.

PETG Material

PETG is a strong and durable thermoplastic commonly used for functional 3D-printed components.

Important PETG characteristics include:

Good mechanical strength
Good impact resistance
Excellent layer adhesion
Better heat resistance than PLA
Good moisture resistance
Suitable for functional electronic enclosures

PETG typically has a glass-transition temperature around 80°C. For practical continuous operation, we recommend keeping the enclosure environment at approximately 70°C or below.

Package Include:

1 x PETG 3D printed enclosure
1 x Power switch
1 x DC barrel connector- 5.5X2.1mm
6 stainless-steel mounting strips
2 × 40 × 40 × 4mm wall-mount brackets
6 x M3 magnetic screws for the P4 Display

P4 RGB LED Matrix Display is NOT included.

All RGB Displays are listed on this page: View All RGB Displays

Wall-mount brackets are included even though they may not be shown in the product images.

Customization Available

Need a different opening, connector position, mounting arrangement, enclosure depth or other modification?

Please contact us before purchasing. If the requested modification is within our design and manufacturing capabilities, we will be happy to design a customized version for you.