🔋 Sony NP‑FZ100 Battery / Sony BC‑QZ1 Charger (with AC Power Cord) 

NP‑FZ100 2280mAh / 16.4Wh / BC‑QZ1 Dock 100–240V / ~150 min Full Charge

---

📌 Condition note (per sourcing option)

• NP‑FZ100 Battery: Genuine.Brand new, with retail box.

• BC‑QZ1 Charger: Genuine.Unused, no retail box.

---

✅ Compatible Product

• α1, α1 II, A9, A9 II, A9 III

• A7 III, A7 IV, A7C, A7C II

• A7R III, A7R IV, A7R V, A7S III

• A6600, A6700, FX3, FX30, ZV‑E1

❌ NOT compatible: A7 II, A7R II, A7S II, A6000 / A6300 / A6400 / A6500 (these use NP‑FW50).

---

📦 Package Contents

• We will ship your order according to your purchased item list.

---

🔍 Product Overview

The NP‑FZ100 is Sony’s Z‑series InfoLITHIUM smart Li‑ion cell (7.2 V, 2280 mAh, 16.4 Wh) powering every modern full‑frame and high‑end APS‑C Sony mirrorless. The BC‑QZ1 is the matching first‑party upright dock that runs on 100–240 VAC and fully charges a depleted FZ100 in ~150 minutes at 25 °C — faster and cooler than in‑body USB‑C trickle. Together they form the standard two‑battery field kit: one in camera, one on the desk finishing its last 10% while you shoot the first.

---

✨ Key Features

🔋 NP‑FZ100 Smart Cell

• 2280 mAh / 16.4 Wh / 7.2 V nominal, 8.4 V charge ceiling.

• InfoLITHIUM chip → camera shows exact 1% battery readout, not 3‑bar guess.

• ~83 g, 38.7×22.7×51.7 mm — same size as your OEM shipped cell.

• Supports in‑camera USB‑C charging and off‑body BC‑QZ1 dock.

⚡ BC‑QZ1 Off‑Body Dock

• ~150 min 0→100% (Sony official figure, 25 °C).

• 100–240 V / 50‑60 Hz, no brick, just AC cord to wall.

• 3‑segment status LEDs + orange CHARGE lamp.

• Talks to battery chip → constant‑current/constant‑voltage taper, auto‑cut, over‑temp guard.

💡 LED behavior: CHARGE lamp goes out at ~90%, status LEDs go dark at true 100%. Lamp out at 90% is NOT “broken” — wait the extra ~15 min for full.

🎒 Shooter Workflow

• Body stays live while spare charges outside.

• Standard kit for wedding / event / wildlife / video B‑roll rotation.

---

⚙️ Technical Specifications

---

💡 Usage Tips

• Charge at 10–30 °C ambient; cold/hot rooms stretch the 150 min number.

• Wipe metal contacts with dry cloth before insert — dirty tabs cause body misread.

• Long‑term storage: leave at 50–60%, not full, not empty.

• BC‑QZ1 LED off at 90% → keep plugged ~10–15 min more for genuine full.

---

⚠️ Important Notes

• 🔴 Not for NP‑FW50 bodies (A7 II / A6300 etc.) — wrong terminal, won’t seat.