Truck Tailgate Light Strip 60" Aluminum FrameTriple Row Light Bar 864 LED w/ Red Running Brake White Reverse Light
3Row Foldable Tailgate Light Bar
Specifications:
Brand New,100% high quality.
Type: 864LEDs 60inch LED Strip light bar, 3-Row Foldable Tailgate Light Bar  
Input voltage: DC12V
LED power: 40W
Strip light Length: 60 inch(150cm)
Strip light width : 0.7inch (17mm) 
Strip light height: 0.7inch (17mm)
Waterproof: IP65
Material: SMD LEDs + Silicone
Feature: Foldable
Led quantity: 864pcs  (288pcs Red SMD + 288pcs White SMD + 288pcs Amber SMD)
Function as a brake light, left/right turn signal light, and backup reverse light
Light Color: Red for Brake, White for Reverse Lights,Yellow for Flow Turn Signal and Double Flash .
Note: This led strip only performs one function. When both brake and turn signal are applied, only the brake light on the LED strip is turned on. The turn signal will start functioning until the brake is released.
Feature: No Drill Install - Full Function Reverse Brake Running, Weatherproof Rigid Aluminum Frame Light Strip for Trucks
 
 
 
 

60" LED Tailgate Light Bar for Pick Up Trucks Trailers Vehicles

  • Aluminum frame super bright: 60” tailgate light bar has triple row led chips, each row with 288 super bright LEDs, a total of 864 SMD 2835 LED chips with high quality, efficient output and lumen can easily light up your travel path, ensure your safety at day and night

  • 6 Full Functions: The Triple-row tailgate light emits Dark red running light, bright red brake light, white reverse light, sequential red turn signals, sequential strobe light. 200-300% Brighter than 1st gen and most light strip on the market

  • Waterproof & Durable: Different from the PVC light strip, this aluminum frame tailgate light adopts IP65 epoxy waterproof technology, which has the characteristics of water resistance, chemical corrosion resistance and crystal clear, resist any harsh weather and environment. Outlasts with a lifespan over 50, 000 hours

  • Easy & Quick Installation: No need to drill, just peel and stick, standard 4-pin flat connector plug and play. Come with a 4-Way Flat Connector Wire, you can also hardwired it and use the additional mounts and screws for extra secure, no worries of falling off

  • Widely applicable: this tailgate Light Strip is 60 inches long and is suitable for most pickups, trailers, truck, towing vehicle, cars, SUV, RV, Van, etc. NOTE: If there is a warning when plugging into the trailer port, please connect the car light wiring follow the line sequence

 
What's Included?
1x 60inch Truck Tailgate LED Light Strip with sticky tape
1x 4-way Flat Female to Color Coded Pigtail Wires Adapter
Screws,connectors and Zip ties
 
 
 
General installation information:   
1. Select desired mounting position and make sure that the surface is clean and clear of dirt, water or wax.
2. Peel off the sticky tape and stick the tailgate bar onto the car
3. Connect the power cord to vehicle
4. Plug and play connectivity with flat 4-pin trailer connection harness for brake/signal, will need to tap wire for the backup reverse light
 
About the Installation:
(1) It's a universal fit, but pls measure the area you're going to install it in first before ordering.
(2) How to install? Do I have to screw the screws if I install it?
No screws necessary. It has a sticky tape already in place. Just peel the paper cover and stick on the tailgate.
 
 
 
UPGRADED 6-Functions:
Running mode, all red LEDs light up(dipped beam)
Brake mode, all Red LEDs light up(high beam)
Reverse mode, all White LEDs light up
Turn left mode, left Amber LEDs sequentially flowing light up
Turn right mode, right Amber LEDs sequentially flowing light up
Hazard Emergency Double Flash Mode:left & Right indicator sequentially flowing from center to both sides.
 
Wires Connection Tips
Green wire is connected to the right turn/Brake;
Yellow wire is connected to the left turn/Brake;
Brown wire is connected to Running; 
White wire is connected to the gound; 
Single White wire is connected to Reverse.
PushAuction