Keep your 3D printer performing at its best with a complete maintenance kit designed for cleaning and lubricating essential moving components.
The OzzyLayer 3D Printer Maintenance Kit combines precision lubrication tools with a dedicated cleaning accessory to help remove dust, old lubricant and residue before applying fresh lubricant.
Designed for regular 3D printer care, this kit provides a cleaner and more controlled way to maintain smooth movement, reduce contamination and keep your printer components properly maintained.
A clean and controlled solution for applying light lubricant to 3D printer components where oil lubrication is recommended.
The precision brush-tip applicator allows a thin and even layer of lubricant to be applied directly onto smooth surfaces without dripping, overspraying or creating unnecessary mess around your printer.
The silicone-based lubricant formulation with PTFE particles helps improve smooth movement and reduce friction on suitable components, while the controlled application helps prevent over-lubrication.
Designed specifically for maintenance of:
✓ Smooth X, Y and Z-axis guide rods
✓ Linear shafts used with compatible bearings or bushings
✓ Compatible sliding mechanisms requiring light oil lubrication
✓ General 3D printer maintenance applications where oil is specified
Features:
✓ Precision brush-tip application
✓ Twist-to-load design for clean use
✓ Silicone oil enhanced with PTFE
✓ Helps reduce friction on suitable moving surfaces
✓ Compact marker-style format
✓ Easy storage in a toolbox or beside your printer
A precision grease applicator designed for components where thicker lubrication is required, including Z-axis lead screws and compatible mechanical parts.
Filled with high-performance synthetic grease enhanced with PTFE particles, providing smooth lubrication, excellent friction reduction and long-lasting performance.
The grease formulation offers:
✓ Premium synthetic grease base
✓ PTFE enhanced lubrication technology
✓ Dielectric properties
✓ Clean, non-staining formula
✓ Wide operating temperature range
✓ Long-lasting mechanical protection
The brush-tip applicator allows precise grease placement without messy fingers or excessive application.
A flexible microfiber cleaning tool designed to remove dust, dirt, old lubricant and residue from hard-to-reach areas of your 3D printer.
The microfiber material attracts, captures and holds contaminants instead of simply moving them around, helping prepare surfaces before lubrication.
The flexible design makes it ideal for cleaning around:
✓ Smooth linear rods
✓ Guide shafts
✓ Moving printer components
✓ Narrow areas where dust and debris accumulate
Features:
✓ High-strength microfiber construction
✓ Captures and holds dust and grime
✓ Flexible design for hard-to-reach areas
✓ Washable and reusable
✓ Helps prepare surfaces before lubrication
1. Clean first
Use the microfiber cleaning tool to remove dust, debris and old lubricant from the component.
2. Apply the correct lubricant
Use the Oil Stick for smooth rods and compatible sliding surfaces.
Use the Grease Stick for Z-axis lead screws and components where grease is recommended.
3. Remove excess lubricant
Apply only a small amount and wipe away excess before operating your printer.
Designed for regular 3D printer maintenance, this kit provides enough lubricant for multiple applications and can last up to 1 year depending on printer usage and maintenance frequency.
1 x OzzyLayer 3D Printer Oil Stick
1 x OzzyLayer 3D Printer Grease Stick
1 x Microfiber Cleaning Tool
Please note: Always follow your printer manufacturer's recommended maintenance instructions. Different printer components require different types of lubrication. Use only a small amount and remove excess lubricant before printing.