Portable 10in high-velocity axial ventilation fan with flexible ducting for moving large volumes of air through enclosed or poorly ventilated areas.
Powered by a 380W motor, the fan delivers a stated airflow of up to 1600CFM and is supplied with approximately 16ft / 5m of flexible duct hose. It is suitable for workshops, garages, basements, building sites, storage areas and general ventilation work.
KEY FEATURES
• 10in portable axial ventilation fan
• Powerful 380W electric motor
• Stated airflow up to 1600CFM
• Approximately 16ft / 5m flexible duct hose
• High-velocity air movement
• Heavy-duty metal fan housing
• Integrated carry handle
• Stable support feet
• Suitable for air extraction or fresh-air supply
• Supplied with UK 3-pin 13A plug
POWERFUL AIR MOVEMENT
The axial fan is designed to move a high volume of air through the connected ducting, helping remove stale air, heat, dust and fumes from enclosed spaces.
It can also be positioned to introduce fresh air into an area where natural ventilation is limited.
FLEXIBLE DUCT HOSE
The supplied flexible hose extends to approximately 5m, allowing air to be directed into or away from difficult-to-reach areas.
The duct can be connected to the fan outlet for extraction or positioned on the inlet side where appropriate for the intended setup.
PORTABLE DESIGN
The compact cylindrical housing includes a carry handle and support feet, making the unit straightforward to move between jobs and position on a level surface.
Its portable design is suitable for temporary ventilation rather than permanent fixed installation.
SUITABLE APPLICATIONS
• Workshops and garages
• Basements and cellars
• Construction and renovation sites
• Warehouses and storage areas
• Confined-space ventilation
• Paint and decorating work
• Heat and stale-air removal
• Dust and fume extraction
• Fresh-air supply
This is a general ventilation fan and must not be used for explosive gases, flammable vapours or hazardous atmospheres unless specifically approved for that application.
IMPORTANT USE INFORMATION
• Position the fan on a stable, dry surface
• Keep the air inlet and outlet clear
• Do not operate in standing water or heavy rain
• Keep the plug and electrical connections dry
• Do not use with explosive or highly flammable vapours
• Avoid sharply bending or crushing the duct hose
• Disconnect from the mains before cleaning or moving
• Allow adequate clearance around the motor and fan housing
• Read the supplied instructions before first use
INCLUDED
• 10in portable axial ventilation fan
• Approximately 16ft / 5m flexible duct hose
• UK 3-pin 13A power lead
• Straps, accessories and documentation shown in the listing photographs
Only the items shown in the listing photographs are included.
FAQ
What size is the fan?
The fan has an approximately 10in diameter.
What is the motor power?
The motor is rated at 380W.
What is the stated airflow?
Up to approximately 1600CFM under suitable operating conditions.
How long is the duct hose?
Approximately 16ft, or 5m.
Does it include a UK plug?
Yes. It is supplied with a UK 3-pin 13A plug.
Can it be used to extract air?
Yes. It can be used to remove stale air, heat, dust and fumes from suitable areas.
Can it also blow fresh air into a space?
Yes. The fan can be positioned for fresh-air supply as well as extraction.
Is it suitable for permanent installation?
It is primarily designed as a portable temporary ventilation unit.
Can it be used outdoors?
It can be used on suitable job sites, but it must be protected from rain, standing water and wet electrical conditions.
Discount available for collection – 07405 422 940