Prime Deals - 07405 422 940
Friendly Service • Quality Products
Momcozy KleanPal Pro BS03 all-in-one baby bottle washer, steam steriliser, dryer and hygienic storage system.

Designed to handle the complete bottle-cleaning process automatically, it washes, sterilises and dries bottles and feeding accessories before keeping them protected in storage mode for up to 72 hours.

KEY FEATURES

• Genuine Momcozy KleanPal Pro BS03
• Washes, steam sterilises, dries and stores
• Holds up to four compatible baby bottles
• Suitable for breast pump parts and feeding accessories
• Nine operating mode combinations
• 19-minute rapid wash programme
• 29-minute normal wash programme
• High-temperature steam sterilisation
• Hot-air drying system
• Hygienic storage mode for up to 72 hours
• Multi-directional spray washing
• Dedicated bottle-cleaning jets
• Touch-control panel
• Separate clean-water tank
• Drainage hose system
• No permanent water connection required

AUTOMATIC BOTTLE CLEANING

Unlike a basic bottle steriliser, the KleanPal Pro also washes bottles and compatible accessories.

Load the items, fill the clean-water reservoir, add a suitable low-foam cleaning tablet or detergent and select the required programme. The machine can then complete the washing, sterilising and drying stages automatically.

MULTI-DIRECTIONAL SPRAY SYSTEM

Rotating spray arms distribute water around the chamber, while dedicated jets direct water inside upright bottles.

This helps remove milk residue from bottle interiors, bases and other areas that can be difficult to reach during manual cleaning.

NINE OPERATING MODES

The available functions can be combined according to the items being cleaned and how quickly they are required.

Programmes include rapid washing, normal washing, sterilising, drying and hygienic storage combinations.

The rapid wash stage takes approximately 19 minutes, while the normal wash stage takes approximately 29 minutes.

STEAM STERILISATION

The sterilising function uses high-temperature steam to treat suitable bottles, teats, breast pump components and feeding accessories.

Always check that each item is suitable for steam sterilisation before placing it inside the machine.

HOT-AIR DRYING

Filtered warm air circulates through the chamber after sterilisation to dry the contents.

This reduces the need to transfer wet bottles to a separate drying rack and helps prepare them for use or storage.

72-HOUR STORAGE MODE

The storage programme periodically circulates filtered air through the closed chamber to help keep the contents dry and protected for up to 72 hours.

CAPACITY

The main rack accommodates up to four compatible bottles per cycle.

The accessories rack can hold smaller parts including:

• Bottle teats and caps
• Breast pump parts
• Valves and membranes
• Pacifiers and dummies
• Teethers
• Small feeding accessories

Items must be positioned correctly so that water, steam and warm air can reach all surfaces.

WATER AND DRAINAGE

The clean-water reservoir is filled manually, so the machine does not require permanent plumbing or connection to a kitchen tap.

IMPORTANT USE INFORMATION

• Use only suitable low-foam bottle-washer detergent
• Do not use ordinary washing-up liquid
• Position the drainage hose securely before starting
• Confirm all items are suitable for machine washing and steam sterilisation
• Allow hot items to cool before removal
• Clean the racks, filters and chamber as instructed
• Read the supplied instructions before first use

INCLUDED

• Momcozy KleanPal Pro BS03 bottle washer
• Bottle rack
• Accessories rack
• Spray components
• Clean-water reservoir
• Drainage hose
• Power cable
• Accessories and documentation shown in the listing photographs

Only the items shown in the listing photographs are included.

FAQ

Does it wash bottles as well as sterilise them?
Yes. It washes, steam sterilises and dries compatible bottles and accessories.

How many bottles does it hold?
It accommodates up to four compatible bottles per cycle, plus smaller accessories.

Does it require plumbing?
No. The clean-water tank is filled manually, although the drainage hose must be positioned over a suitable outlet or container.

Can it clean breast pump parts?
Yes, provided the components are suitable for machine washing, steam sterilisation and heated drying.

How long is the rapid wash programme?
The rapid washing stage takes approximately 19 minutes.

Does it dry the bottles?
Yes. It uses filtered hot air to dry the contents after sterilisation.

How long can items remain in storage mode?
The hygienic storage programme operates for up to 72 hours.

Can ordinary washing-up liquid be used?
No. Use only a suitable low-foam bottle-washer detergent or cleaning tablet.

Discount available for collection – 07405 422 940