Introduction
MXR-B3 based on MXR-B2 coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.

Application 

For Honda Accord 10th generation 2018-2022 (CV1/CV2/CV3) without Active Damper Syste

Specification

Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
Damping adjustable: Yes, 24 levels of rebound damping force
Front top mount: Standard rubber
Rear top mount: OE top mount required
Camber adjustable: Not available
Spring Rate Front: 8 kg/mm(448 lbs/in)
Spring Rate Rear: 8 kg/mm(448 lbs/in)
Spring length Front: 180 mm
Spring length Rear: 179 mm
Spring Preload advised: 7-10 mm
Shock Type: Twin tube

Package included
2 x Front coil-overs
2 x Rear coil-overs
1 x Allen wrench
2 x C spanners

Dimension
Package Size: 71*51*21 cm
Weight: 24950 g

Feature

1. Lowered height adjustment from 25-75mm (depends on vehicle models)which allows a lower center of gravity and also add a more aggressive stance
2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
3. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response.( for some models)
4. CNC machined Aluminum  top mounts and lockers-- - excellent strength, and save weight
5. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
6. High tensile spring---  600,000 times continuously test to assure its high tensile strength.
7. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
8. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
9. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts

Note

1.  All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2.  Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation.  Any loose nuts, bolts, or locks will cause noise.  Do check and tighten before serious problems happen.
3.  Impact wrench is prohibited during the installation, it will loosen or damage the product.
4.  Examine the clearance between tires and suspension.  ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers.  Caution: It is not sufficient with torsion beam trailing arm axles)
5.  We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.