🔋 Insta360 Ace Pro 2 Battery
Removable Li‑Ion, 35.2 g, 38.7×37.1×12.8 mm, Ace Pro 2 Exclusive
✅ Compatible Devices
- Insta360 Ace Pro 2
📦 In The Box
- 1 × Insta360 Ace Pro 2 Rechargeable Battery (1800 mAh)
🔍 Product Overview
The Insta360 Ace Pro 2 Battery is a precision‑engineered 1800 mAh Li‑ion power cell built exclusively for the Ace Pro 2's dual‑chip architecture and high‑bitrate 8K workflows.
Unlike generic replacements, this official cell integrates a custom BMS with digital handshake — communicating health metrics, temperature, and cycle count to the camera's AI processor for real‑time power budgeting. Supporting USB‑C PD fast‑charge, it hits 80 % in 18 minutes / 100 % in 47 minutes with a 30 W PD brick. At 35.2 g with an operating range of ‑20 °C to 45 °C, it's ruggedized for alpine skiing, desert moto, and arctic expeditions. The 1800 mAh capacity delivers up to 180 minutes of 1080p Endurance recording or ~100 minutes of 8K30 — making a 2‑pack spare set essential for all‑day shoots.
✨ Key Features
⚡ PD Fast‑Charge — 18 min to 80 %
- 30 W USB‑C PD/PPS Input: 5 V/3 A, 9 V/3 A, 12 V/2.5 A negotiation.
- Lab‑Tested (25 °C): 80 % in 18 min / 100 % in 47 min with 30 W PD source.
- Standard Charge: ~75 min with 18 W QC/PD brick.
- Reverse‑Charge Aware: Camera can identify fast‑charge capable cells and adjust draw accordingly.
🌡️ Extreme‑Temperature Rated — ‑20 °C to 45 °C
- Cold‑Weather Certified: Operates down to ‑20 °C (‑4 °F) — ski/snowboard ready.
- Hot‑Weather Rated: Up to 45 °C (113 °F) ambient — desert moto/surf sessions.
- Charge Window: 0 °C to 40 °C (32–104 °F) — do NOT charge frozen/hot batteries.
- Thermal Cutoff: BMS auto‑throttles charge current if cell exceeds safe temp.
🔒 Custom BMS + Digital Authentication
- Encrypted Handshake: Camera verifies authentic Insta360 cell — rejects counterfeits.
- Health Telemetry: Reports cycle count, internal resistance, remaining capacity to Ace Pro 2.
- Over‑Current / Over‑Voltage / Under‑Voltage / NTC Protection: Multi‑layer safety.
- No Memory Effect: Li‑ion chemistry — partial discharge/recharge safe.
📊 Runtime Expectations (Lab Conditions, 25 °C)
🪶 Compact & Lightweight
- 35.2 g (1.2 oz): Minimal added weight for gimbal balance.
- 38.7×37.1×12.8 mm: Precision‑molded with keyed notch — foolproof insertion.
- Matte Black Finish: Scratch‑resistant, heat‑dissipating shell.
⚙️ Technical Specifications
💡 Usage Tips
- Fast‑Charge Setup: Use a 30 W USB‑C PD/PPS brick (GaN preferred) — 18 W bricks take ~75 min full.
- Cold‑Weather Protocol: Keep spares inside jacket pocket between takes — battery efficiency drops sharply below 0 °C.
- Hot‑Battery Cool‑Down: After 8K/4K120 session, let battery cool to room temp before plugging in — hot‑charge accelerates degradation.
- Storage Charge: For long‑term storage (>3 weeks), charge to 50–60 % — prevents deep‑discharge damage.
- Cycle Maintenance: Every 3 months, top up stored batteries to 50–80 % to keep cells active.
- Swamp‑Change: Keep 2–3 spares for all‑day shoots — 47‑min fast‑charge during lunch break keeps you rolling.
⚠️ Important Notes
- Ace Pro 2 ONLY: ❌ Not compatible with Ace / Ace Pro Gen 1 — different BMS protocol & physical keying.
- Official Cells Only: ❌ Third‑party/generic batteries NOT supported — camera will reject or limit functionality; Insta360 disclaims all liability for non‑official cells.
- No Fast‑Charge Hub Included: This listing is battery only — charging hub/case sold separately.
- Charging Temp Window: 0–40 °C ONLY — charging frozen (<0 °C) or hot (>40 °C) batteries risks swelling/leakage.
- Water Contact: ❌ Keep battery dry — if submerged, dry completely before insertion.
- Deep‑Discharge Damage: Do NOT store fully depleted — recharge to 50%+ within days of use.
- Swelling = Replace: Any bulge, crack, or leakage = immediate retirement — do NOT attempt to charge/discharge.