1.Injector coding: Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;

2.Battery Register / Battery Maintenance : Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc;

3.Electronic Throttle Position Reset / Learn : Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;

4.Oil Light / Service Reset: Allows you to reset the service lamps on the instrument cluster;

5.Antilock Brake System (ABS) Service: Allows you to use the scanner temporarily to activate or control anti-lock brake system;

6.Tire Pressure Monitoring System (TPMS) Programming: Allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires sensors are replaced or rotated;

7.Steering Angle Sensor (SAS) Calibration: Allows you to perform calibration of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor . After calibrate sensor successfully, its fault memory will be automatically cleared;

8.Electronic Parking Brake (EPB) Service: Allows you to perform service and maintenance, including deactivation and activation of brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on where electronic brake systems are fitted. Diagnoses EPB caliper functionality, initializes the wear indicator if new pads installed and deactivates or re-activates brake control system.
......

BATTERY RESGISTRATION

How to register a battery with this car diagnostic tool for fit for BMW? In fact, it’s much easier than imagination. Here is the process step by step:
Remove old battery -Install new battery -Enter a new battery 12 digits code(Please correctly enter the 12digit battery code , Or it will affect the accuracy of the product .) .If you still have questions about battery replacement or other detail problems, just write to us, we’ll try our best to help you out.

AUTOPHIX 7910 is a handheld scanner that features 10 OBD2 test modes as

Read/clear code

View real-time data/vehicle information

Retrieve I/M readiness status

EVAP system test, etc.

Displays freeze frame data

The affordable OBD2 scanner cannot only retrieve generic (P0, P2, P3, and U0) but also the manufacturer-specific (P1, P3, and U1) codes, aiming at helping technicians quickly identify the faulty part and accurately diagnose the emissions-related problems.