10x - 50x 12V LED RGB modules with 3 SMD each incl. Touch controller, selectable with or without a suitable 240V power supply.
Light color: selectable via controller, e.g. warm white, cold white, red blue green purple etc.
Product description
- High performance with low power consumption
- 3X 5050 Samsung chips have a very high light output
- Beam angle of 150°
- Low installation height - high-quality ABS plastic
- Modules can be shortened as desired
- incl. RGB control unit
- 3M adhesive tape on the back, allowing for quick and secure installation
Product features LED modules
- Type: LED
- Power [W]: 0.72W (per module, total up to 36 watts with 50x modules)
- Voltage [V]: 12V
- Chip: 3X 5050 Samsung
- Color temperature [K/nm]: RGB Multi Color
- IP protection class: IP65
- Beam angle: 150°
- 180 Lumens - Brightness may vary for colors
- Dimensions: 78mm x 16mm x 7mm (length x width x height)
- Module spacing: max. 13.5mm
- Lifespan: up to 40,000 hours
Product features power supply
- Power: 10-40 watts, depending on the number of LED modules with your purchase, the matching power supply will be sent along. e.g. Example for 10x modules 10 watt power supply (pictured), 20x the 20 watt, 50x the 40 watt power supply.
- Weight 205-950g depending on the power supply
- Input voltage 110-260 volts AC 50-60 Hz clocking
- Output voltage 12 volts DC direct current
- IP 67 dustproof, waterproof (for a maximum of 30 minutes, up to a maximum water depth of 1m)
- Operating temperature - 30° to + 50°
- without Schuko plug
Product features Touch Controller
- Working temperature: approx. -30°C to +60°C.
- Voltage: DC12V-DC24V
- Output: 3 channels
- Transmission/reception frequency: 433.92 MHz
- External dimensions: approx. L86.5Χ W55.5Χ H23 mm
- Color mode: 18 mode
- Output power: <216W / 432W
- Charging current: 6Ax3CH 18A max.
- Control mode: Touchable / RF remote control
- Remote control instructions:
The RGB controller has a total of 4 modes & can change its mode by touching the On button.
1. Simple color mode, both color and brightness are adjustable.
2. Gentle change mode, speed & brightness are adjustable.
3. Erratic changing mode, speed & brightness are adjustable.
4. White light mode - only the brightness can be adjusted.
!!! Important:
The input voltage of the remote control must match that of the RGB strips.
Check whether the wiring is connected correctly. If not, swap blue and green into the correct compounds.
Areas of application
- Automotive industry
- Construction industry
- Display construction
- Interior design
- Trade fair and shop construction
- Furniture making
- Advertising technology
- Advertising showcase construction
- Home and garden lighting
- Aquarium construction and lighting
- and much more ...