• Fitment:
  • For
  • 2003-2009 Ford F-250
  • 2003-2023 Ford F-250 Super Duty 2003-2016 Ford F-350 2003-2023 Ford F-350 Super Duty (SRW Only; Dually Models will NOT fit) 2003-2005 Ford Excursion
  • Note: Factory Thread can be 14x1.5 or 14x2, pls check first, only for 14x1.5 studs.
  • Please check compatibility notes & description for accurate information.Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
  • TIPS:

    • 2p 1.5" Wheel Spacers 8x6.69" For 2003-2023 Ford F-250 Super Duty 14x1.5 Thread

    Fitment:

    For

    2003-2009 Ford F-250

    2003-2023 Ford F-250 Super Duty
    2003-2016 Ford F-350
    2003-2023 Ford F-350 Super Duty (    SRW Only; Dually Models will NOT fit)
    2003-2005 Ford Excursion

    Note: Factory Thread can be 14x1.5 or 14x2, pls check first, only for 14x1.5 studs.

    Please check compatibility notes & description for accurate information.Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.

    TIPS:

    1. Measure the fender gap and stock bolt length to choose suitable thickness. (For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)

    2. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters,Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.

     

    Specifications:

    Spacer Thickness:  1.5 inch or 38 mm

    Vehicle bolt pattern:  8x6.69 inch or 8x170 mm

    Wheel bolt pattern：8x6.69 inch or 8x170 mm

    Thread Size：14x1.5

    Bolt Shack Length: 47 mm

    Torqued Down By Hand At: 85-90 FT/LBS

    Hub Bore: 125 mm

     

    Package including:

     2x Wheel Spacers

    (If there's a small tube of pink liquid in the package,it's thread locker.)

     

    Installation tips:

    1: Safely jack up the appropriate end of the vehicle and set if firmly on stands and remove the wheel nuts/bolts and wheels.

    2: Remove the retaining washers and use a wire brush or abrasive pad to clean the flat surface to remove rust and corrosion. If the surface is not clean, it will vibrate.

    3: Place a wheel spacer over the axle hub studs and make sure it sits firmly against the hub, then tighten the nuts in a crisscross pattern.

    4: Place the wheel back onto the spacer and install the nuts in a crisscross pattern5: Lower the vehicle to the ground.

     

    **After the tire is enlarged, to leave enough room for the front wheel steering.At the same time to strengthen the stability of the vehicle.During the installation process, it is necessary to observe that the gasket or flange can be completely fitted with the contact surface of the wheel hub and the wheel shaft, and try to make the added gasket or flange form a whole with the wheel hub and the wheel shaft. If you look directly above the car, the rims do not go beyond the top edge of the leaf, and it is best to achieve just flush.

     

    Notes:

    1. Professional installation is highly recommended.Due to the different display and different light, the picture may not reflect the actual color of the item.

    2. All the items will be shipped to the buyer's address on the Paypal account, so please make sure that the address is correct.

    3. Any damage during installation will not be refunded. Any modify action is excludes warranty.Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)

    4. If you have any questions, feel free to contact us, and we will reply you as soon as possible with the exception of weekends and holidays.


    Item Specifics
    Manufacturer Part Number 11785276
    Brand APK
    Vehicle Bolt Pattern 8x6.69" or 8x170mm
    Manufacturer Warranty 1 Year
    Hub Center Bore 125mm
    Vintage Car Part No
    Interchange Part Number 2003-2005 Ford Excursion
    OE/OEM Part Number 2003-2022 Ford F-350 Super Duty SRW Only
    Superseded Part Number 2003-2022 Ford F-250 Super Duty
    Universal Fitment No
    Type Wheel Spacer
    Color Silver
    Torqued Down By Hand At 85-90 FT/LBS
    Material High Quality t6 6061 Billet Aluminum
    Package Gross Weight 9.74lb
    Wheel Bolt Pattern 8x6.69" or 8x170mm
    Number of Pieces 2
    Thread Pitch 14mm x 1.5 or 14x1.5 or M14x1.5
    Items Included 2 pcs wheel spacers
    Hubcentirc No
    Bolt Shank Length 47mm
    Thickness 1.5" or 38mm
    Stud Grade 10.9
    Surface Finish CNC Machined Polished Aluminum Finish
    Lug Patterns 8 Lugs

    Payment

    1. We accept any payment which can be accepted by ebay.
    2. All major credit cards are accepted through secure payment.
    3. Payment must be received within 7 business days of auction closing.
    4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
    5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
    Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.

    Shipping
    1. We ship to your eBay order address. Please make sure your order address is correct before you pay.
    2. Items will be shipped within 1-3 business day when we received payment.
    3. Delivery time depends on destination and other factors;
    4. International buyers please note:
      a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
      b. Please check with your country's customs office to determine what these additional costs will be prior to buying.
    Returns

    All items will confirm the adaptation information of the model with you before delivery, please check the eBay news in time and provide your vehicle information so that we can confirm the product compatibility. If you have not responded to eBay messages within 3 working days after placing the order, we will still send the item for you, but we will not be responsible for return fees or other costs due to incompatibility of the item.
    Any other item shipping damage or use problem, please contact us via eBay message in time, we will reply you within 1 working day.

    Contact Us

    Our working time:
    Beijing time:Monday to Saturday 8:00 am to 6:00
    We do not work holidays in China

    If you send email to us,In our working hours will be resumed within 48 hours.
    If you we are not satisfied with the product or service,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution

    Shop Category
     Store Home
     Brake Rotors And Brake Pads
     Car Door Handle
     Car Window Switch
     Car Cab Side Light
     Instrument Lights
     LED Brake Light
     Interior Lights
     External Lights
     License Plate Light
     Car Headlight
     Roof Rack Cross Bar
     Rear Spoiler
     Sun Visor
     Center Console Armrest Lid
     Headlight Assembly
     Taillights Assembly
     Car Mirror Assembly
     Car Horn Trumpet
     Cargo Cover
     Mirror Glass
     Bumpers & Reinforcements
     Fuel Pump & High Pressure Pump
     Window Motors & Regulators
     Ignition Coils
     Splash Guards & Mud Flaps
     Wheel Spacers & Adapters
     Dipstick
     CV Joint Axle,Boots & Parts
     Wheel Hub Bearing
     Alternator
     Suspension & Steering
     Cooling Fan
     Radiator
     Transfer Case
    Hot Item
    Excellent Delivery

    content_src_url

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    New List Item
    2p 1.5" Wheel Spacers 8x6.69" For 2003-2023 Ford F-250 Super Duty 14x1.5 Thread

    Fitment:

    For

    2003-2009 Ford F-250

    2003-2023 Ford F-250 Super Duty
    2003-2016 Ford F-350
    2003-2023 Ford F-350 Super Duty (    SRW Only; Dually Models will NOT fit)
    2003-2005 Ford Excursion

    Note: Factory Thread can be 14x1.5 or 14x2, pls check first, only for 14x1.5 studs.

    Please check compatibility notes & description for accurate information.Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.

    TIPS:

    1. Measure the fender gap and stock bolt length to choose suitable thickness. (For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)

    2. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters,Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.

     

    Specifications:

    Spacer Thickness:  1.5 inch or 38 mm

    Vehicle bolt pattern:  8x6.69 inch or 8x170 mm

    Wheel bolt pattern：8x6.69 inch or 8x170 mm

    Thread Size：14x1.5

    Bolt Shack Length: 47 mm

    Torqued Down By Hand At: 85-90 FT/LBS

    Hub Bore: 125 mm

     

    Package including:

     2x Wheel Spacers

    (If there's a small tube of pink liquid in the package,it's thread locker.)

     

    Installation tips:

    1: Safely jack up the appropriate end of the vehicle and set if firmly on stands and remove the wheel nuts/bolts and wheels.

    2: Remove the retaining washers and use a wire brush or abrasive pad to clean the flat surface to remove rust and corrosion. If the surface is not clean, it will vibrate.

    3: Place a wheel spacer over the axle hub studs and make sure it sits firmly against the hub, then tighten the nuts in a crisscross pattern.

    4: Place the wheel back onto the spacer and install the nuts in a crisscross pattern5: Lower the vehicle to the ground.

     

    **After the tire is enlarged, to leave enough room for the front wheel steering.At the same time to strengthen the stability of the vehicle.During the installation process, it is necessary to observe that the gasket or flange can be completely fitted with the contact surface of the wheel hub and the wheel shaft, and try to make the added gasket or flange form a whole with the wheel hub and the wheel shaft. If you look directly above the car, the rims do not go beyond the top edge of the leaf, and it is best to achieve just flush.

     

    Notes:

    1. Professional installation is highly recommended.Due to the different display and different light, the picture may not reflect the actual color of the item.

    2. All the items will be shipped to the buyer's address on the Paypal account, so please make sure that the address is correct.

    3. Any damage during installation will not be refunded. Any modify action is excludes warranty.Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)

    4. If you have any questions, feel free to contact us, and we will reply you as soon as possible with the exception of weekends and holidays.

    Item Specifics
    Manufacturer Part Number :11785276
    Brand :APK
    Vehicle Bolt Pattern :8x6.69" or 8x170mm
    Manufacturer Warranty :1 Year
    Hub Center Bore :125mm
    Vintage Car Part :No
    Interchange Part Number :2003-2005 Ford Excursion
    OE/OEM Part Number :2003-2022 Ford F-350 Super Duty SRW Only
    Superseded Part Number :2003-2022 Ford F-250 Super Duty
    Universal Fitment :No
    Type :Wheel Spacer
    Color :Silver
    Torqued Down By Hand At :85-90 FT/LBS
    Material :High Quality t6 6061 Billet Aluminum
    Package Gross Weight :9.74lb
    Wheel Bolt Pattern :8x6.69" or 8x170mm
    Number of Pieces :2
    Thread Pitch :14mm x 1.5 or 14x1.5 or M14x1.5
    Items Included :2 pcs wheel spacers
    Hubcentirc :No
    Bolt Shank Length :47mm
    Thickness :1.5" or 38mm
    Stud Grade :10.9
    Surface Finish :CNC Machined Polished Aluminum Finish
    Lug Patterns :8 Lugs


    1. We accept any payment which can be accepted by ebay.
    2. All major credit cards are accepted through secure payment.
    3. Payment must be received within 7 business days of auction closing.
    4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
    5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
    Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.

    1. We ship to your eBay order address. Please make sure your order address is correct before you pay.
    2. Items will be shipped within 1-3 business day when we received payment.
    3. Delivery time depends on destination and other factors;
    4. International buyers please note:
      a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
      b. Please check with your country's customs office to determine what these additional costs will be prior to buying.

    All items will confirm the adaptation information of the model with you before delivery, please check the eBay news in time and provide your vehicle information so that we can confirm the product compatibility. If you have not responded to eBay messages within 3 working days after placing the order, we will still send the item for you, but we will not be responsible for return fees or other costs due to incompatibility of the item.
    Any other item shipping damage or use problem, please contact us via eBay message in time, we will reply you within 1 working day.

    Our working time:
    Beijing time:Monday to Saturday 8:00 am to 6:00
    We do not work holidays in China

    If you send email to us,In our working hours will be resumed within 48 hours.
    If you we are not satisfied with the product or service,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution


    All rights reserved.