|
|
|
|
|
|
|
|
|
|
|
Fits Applications:
For Dodge For Ram 1500 2002-2010 V6 3.7L Front Left or Right 4WD
For Dodge For Ram 1500 2002-2004 V8 4.7L Front Left or Right 4WD
For Dodge For Ram 1500 2003-2010 V8 5.7L Front Left or Right 4WD
For Dodge For Ram 1500 2002-2003 V8 5.9L Front Left or Right 4WD
For Ram 1500 2011 V6 3.7L Front Left or Right 4WD
For Ram 1500 2011 V8 5.7L Front Left or Right 4WD
For Ram 1500 2011 V8 4.7L Front Left or Right 4WD
What Are The Signs Of a Failing CV Axle?
You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.
The steps and tools needed for an CV axle replacement
This is a challenging and technical project
Tool List
Jack
Jack stands
Automotive tool set (pliers, screwdrivers, sockets)
Pry bar
Lubricant
Brake Cleaner
Hammer or mallet
Impact wrench (optional)
CV axle replacement
Pro Tip
Additional specialized tools such as tie-rod end pullers, ball joint removers, and vehicle-specific sockets may be required
1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions.
Tip: Leave one side assembled while you work on the other so you can remember how things go back together.
2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue.
3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose.
4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly.
5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals.
6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way.
7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.
Noticed
-Instruction is not included. Professional installation is recommended
-Accessories: You will get exactly showing in the picture
-Please confirm your original part number before purchasing
-Please Send us a message for anything we can help you with
| Item Specifics | |
|---|---|
| Manufacturer Part Number | FK16179401P |
| Brand | Fuel_Kingparts |
| Placement on Vehicle | Front Left Right |
| Fitment Type | Direct Replacement |
| Part Type | CV Axle Assembly,CV Axle Shaft |
| Quantity | 1 |
| Surface Finish | Heat treatment |
| Non-Domestic Product | No |
| OE/OEM Part Number | 5072389AA,5072389AB |
| Superseded Part Number | 5170822AA |
| Interchange Part Number | 66-3404 |
| Mounting Hardware Included | No |
| Length | 23.75" |
| Colour | Normal black |
| Bundle Listing | No |
| Manufacturer Warranty | 1 Year |
| Main composition | steel |
| OE Spec or Performance/Custom | Performance/Custom |
| Feature | With ABS |
| Modified Item | No |
| Input Shaft Connection Style | Splined |
| Input Shaft Spline Count | 29 |
| Output Shaft Connection Style | Splined |
| Input Shaft Spline Count | 33 |
| Drive Type | 4WD |
| Transmission Type | Automatic |
| ABS Ring Included | Yes |
| Axle Nut Locking Type | Self-Lock |
| Spindle Nut Included | Yes |
Please make sure your adress is corect before shipment.
All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
All of our brand new items come with a 30-Days money-back guarantee.
Any question, please contact us by email on working days.
WARNING: Please confirm compatibility again.
Best Sales
Newly Listed
Terms & Contact Payment Policy Shipping Policy Return Policy FAQ About Us |
CV Axle Assembly For Ram 1500 2011 3.7L 4.7L 5.7L Front Driver or Passenger 4WD
Fits Applications: For Dodge For Ram 1500 2002-2010 V6 3.7L Front Left or Right 4WD
What Are The Signs Of a Failing CV Axle? You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.
The steps and tools needed for an CV axle replacement This is a challenging and technical project Tool List Jack Jack stands Automotive tool set (pliers, screwdrivers, sockets) Pry bar Lubricant Brake Cleaner Hammer or mallet Impact wrench (optional) CV axle replacement Pro Tip 1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions. Tip: Leave one side assembled while you work on the other so you can remember how things go back together. 2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue. 3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose. 4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly. 5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals. 6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way. 7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.
Noticed -Instruction is not included. Professional installation is recommended -Accessories: You will get exactly showing in the picture -Please confirm your original part number before purchasing -Please Send us a message for anything we can help you with
Please make sure your adress is corect before shipment. All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days. All of our brand new items come with a 30-Days money-back guarantee. Any question, please contact us by email on working days. WARNING: Please confirm compatibility again.
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
