234LED Outdoor Night Light Waterproof Solar Outdoor Sunlight Lamp Sensory Switch Easy Installation Adjustable for Courtyard Park

Features:

1. Modular Design: Our curved solar light features a separate solar panel and main light fixture. Simply mount the detachable solar panel in a sunny spot, and the 16.4-foot cable allows you to place the LED light panel anywhere—it works even without direct sunlight.

2. Wider Illumination Range: Upgraded with 234 ultra-bright LED bulbs and a wider 5.5V 1.5W polycrystalline silicon solar panel, this solar light provides high-brightness illumination of 600 lumens.

3. Three Operating Modes: A button switch controls three operating modes, cycling through them with each press. Mode 1: 100% brightness when motion is detected; remains at 30% brightness for 20 seconds after the person leaves. Mode 2: Automatically turns on at dusk. 100% brightness when motion is detected; remains at 30% brightness for 20 seconds after the person leaves. Mode 3: No motion detection; automatically stays on at 50% brightness all night and turns off at dawn.

4. Easy Installation: This outdoor solar security light offers two installation options (with or without an extension cord) to better meet your lighting needs. No complicated wiring is required; simply use the included screws to mount the solar motion sensor light on any exterior wall.

5. Waterproof Performance: Made from high-quality ABS+PC material, this solar light is suitable for various extreme outdoor weather conditions and features waterproof, dustproof, heat-resistant, and freeze-resistant capabilities.

Specification:
Origin: Mainland China
Power Source: Solar
Is Bulbs Included: Yes
Style: Modern Style
Model Number: Wall Lamp
Usage: EMERGENCY
Product size: 140* 140 * 53mm
Solar panel: 5.5V 1.5W
Light source: 2835 * 234LED
Battery: 18650
Waterproof grade: IP68
Certification: CE, FCC, ROHS, IP65,
Test report: battery MSDS test report, UL UN38.3 test report

【Installation Guide】

1. Please check the light works normally or not. Place the solar panel face down and press the Mode button. lf the light blinks and turns on, it is working correctly.



2. Select the mode by covering the solar panel with your palm and pressing the Power button.(NOTE: Solar Light auto on at night, auto off during the day)



Mode 1(Recommended): Sensor light mode.Click Power button the first time.(Light off when there is no movement, full brightness when motion is detected)

Mode 2: Dim brightness sensor mode.Click Power button the second time.(Dim brightness when there is no movement, full brightness when motion isdetected)

Mode 3: Dim brightness.Click Power button the third time.(The light will remain at dim brightness always)

Mode set in cycle (Mode1-Mode2-Mode3-off)

3. Install the light on desired location.(Try to pick the spot where solar panel will get sufficient direct sunlight throughout the day)



【Attentions】

1. For maximum battery capacity, it is recommended that the solar sensor light be charged by direct sunlight for at least eight hours before initial use.

2. To ensure proper functioning of the light detector, please install it away from other light sources.

3. lf the battery is completely discharged, the solar lamp may not light up after a short charge or on cloudy days. In this case, the solar lamp must be exposed to direct sunlight for at least 2-3 days to restart.

4. Do not dispose of batteries in a fire.

5. Batteries should be recycled or disposed of according to state and local guidelines.

Packages: 

1-6x Wall Lamp