Stretchy drive shaft boot kit
Made from high-quality Silicone that is resistant to grease, water, ozone, abrasion, and extremes of temperature
Made from high-quality Silicone that is resistant to grease, water, ozone, abrasion, and extremes of temperature
NOTICE:
DO NOT ORDER BASED SOLELY ON VEHICLE MODEL
You MUST compare your CV joint and drive shaft measurements with the exact dimensions below. Compatibility is determined by physical size, not vehicle trim level.
You MUST compare your CV joint and drive shaft measurements with the exact dimensions below. Compatibility is determined by physical size, not vehicle trim level.
Fitment:
For Most Jeep Model
Fits most inner & outer CV joints (except metal bonded & trilobal)
No Joint dismantling necessary No cutting needed
Fits Shafts 19 - 28mm and CV Joints 56 - 110mm
Fits most inner & outer CV joints (except metal bonded & trilobal)
No Joint dismantling necessary No cutting needed
Fits Shafts 19 - 28mm and CV Joints 56 - 110mm
Specifications:
Condition: 100% Brand New
Type: Stretchable CV Axle Boot / Drive Shaft Joint Boot For Toyota
Color: Black
Material: High-Grade Automotive Silicone + Marine-Grade Stainless Steel
Total Boot Length: 4.72 inches (120mm)
Small Port Inner Diameter: 0.78 inches (20mm)
Pre-Molded Large Port Calibers: 2.55" (65mm), 3.14" (80mm), 3.54" (90mm)
Temperature Resistance: -40°F to 428°F (-40°C to 220°C)
Compatible Shaft Diameter: 19mm - 28mm
Compatible CV Joint Diameter: 56mm - 110mm
Condition: 100% Brand New
Type: Stretchable CV Axle Boot / Drive Shaft Joint Boot For Toyota
Color: Black
Material: High-Grade Automotive Silicone + Marine-Grade Stainless Steel
Total Boot Length: 4.72 inches (120mm)
Small Port Inner Diameter: 0.78 inches (20mm)
Pre-Molded Large Port Calibers: 2.55" (65mm), 3.14" (80mm), 3.54" (90mm)
Temperature Resistance: -40°F to 428°F (-40°C to 220°C)
Compatible Shaft Diameter: 19mm - 28mm
Compatible CV Joint Diameter: 56mm - 110mm
Features:
✅ Direct Fit for Most Jeep Models
Designed to fit most shaft diameters 19–28mm and CV joint outer diameters 56–110mm, covering common sizes found in Jeep Wrangler JK/JL, Cherokee, Grand Cherokee, Patriot, Compass, and Liberty. Works with both front and rear axles for on-road and off-road use.
✅ Durable & Long-Lasting Protection
Made of high-quality rubber material, these CV boots resist cracks, tears, and oil leaks, keeping dirt, water, and debris away from your CV joints. Helps extend the life of your drive axles and prevents premature wear.
✅ Complete Repair Kit
Each kit includes 2 CV boots, stainless steel clamps, and zip ties for a full installation. Everything you need to replace old, cracked boots without buying extra parts.
✅ Easy to Install
No special tools required for most installations. Designed for a secure fit with standard CV joint clamps, making DIY repair simple and cost-effective.
✅ Cost-Effective Alternative to OEM
Avoid expensive dealership replacements with this affordable, reliable kit. Provides the same level of protection as OEM-style boots at a fraction of the cost.
✅ Direct Fit for Most Jeep Models
Designed to fit most shaft diameters 19–28mm and CV joint outer diameters 56–110mm, covering common sizes found in Jeep Wrangler JK/JL, Cherokee, Grand Cherokee, Patriot, Compass, and Liberty. Works with both front and rear axles for on-road and off-road use.
✅ Durable & Long-Lasting Protection
Made of high-quality rubber material, these CV boots resist cracks, tears, and oil leaks, keeping dirt, water, and debris away from your CV joints. Helps extend the life of your drive axles and prevents premature wear.
✅ Complete Repair Kit
Each kit includes 2 CV boots, stainless steel clamps, and zip ties for a full installation. Everything you need to replace old, cracked boots without buying extra parts.
✅ Easy to Install
No special tools required for most installations. Designed for a secure fit with standard CV joint clamps, making DIY repair simple and cost-effective.
✅ Cost-Effective Alternative to OEM
Avoid expensive dealership replacements with this affordable, reliable kit. Provides the same level of protection as OEM-style boots at a fraction of the cost.
Package Included:
2 CV joint boot
4 stainless steel clamps
6 cable ties
2 CV joint boot
4 stainless steel clamps
6 cable ties
Stretchy drive shaft boot kit
Made from high-quality Silicone that is resistant to grease, water, ozone, abrasion, and extremes of temperature
Made from high-quality Silicone that is resistant to grease, water, ozone, abrasion, and extremes of temperature
NOTICE:
DO NOT ORDER BASED SOLELY ON VEHICLE MODEL
You MUST compare your CV joint and drive shaft measurements with the exact dimensions below. Compatibility is determined by physical size, not vehicle trim level.
You MUST compare your CV joint and drive shaft measurements with the exact dimensions below. Compatibility is determined by physical size, not vehicle trim level.
Fitment:
For Most Jeep Model
Fits most inner & outer CV joints (except metal bonded & trilobal)
No Joint dismantling necessary No cutting needed
Fits Shafts 19 - 28mm and CV Joints 56 - 110mm
Fits most inner & outer CV joints (except metal bonded & trilobal)
No Joint dismantling necessary No cutting needed
Fits Shafts 19 - 28mm and CV Joints 56 - 110mm
Specifications:
Condition: 100% Brand New
Type: Stretchable CV Axle Boot / Drive Shaft Joint Boot For Toyota
Color: Black
Material: High-Grade Automotive Silicone + Marine-Grade Stainless Steel
Total Boot Length: 4.72 inches (120mm)
Small Port Inner Diameter: 0.78 inches (20mm)
Pre-Molded Large Port Calibers: 2.55" (65mm), 3.14" (80mm), 3.54" (90mm)
Temperature Resistance: -40°F to 428°F (-40°C to 220°C)
Compatible Shaft Diameter: 19mm - 28mm
Compatible CV Joint Diameter: 56mm - 110mm
Condition: 100% Brand New
Type: Stretchable CV Axle Boot / Drive Shaft Joint Boot For Toyota
Color: Black
Material: High-Grade Automotive Silicone + Marine-Grade Stainless Steel
Total Boot Length: 4.72 inches (120mm)
Small Port Inner Diameter: 0.78 inches (20mm)
Pre-Molded Large Port Calibers: 2.55" (65mm), 3.14" (80mm), 3.54" (90mm)
Temperature Resistance: -40°F to 428°F (-40°C to 220°C)
Compatible Shaft Diameter: 19mm - 28mm
Compatible CV Joint Diameter: 56mm - 110mm
Features:
✅ Direct Fit for Most Jeep Models
Designed to fit most shaft diameters 19–28mm and CV joint outer diameters 56–110mm, covering common sizes found in Jeep Wrangler JK/JL, Cherokee, Grand Cherokee, Patriot, Compass, and Liberty. Works with both front and rear axles for on-road and off-road use.
✅ Durable & Long-Lasting Protection
Made of high-quality rubber material, these CV boots resist cracks, tears, and oil leaks, keeping dirt, water, and debris away from your CV joints. Helps extend the life of your drive axles and prevents premature wear.
✅ Complete Repair Kit
Each kit includes 2 CV boots, stainless steel clamps, and zip ties for a full installation. Everything you need to replace old, cracked boots without buying extra parts.
✅ Easy to Install
No special tools required for most installations. Designed for a secure fit with standard CV joint clamps, making DIY repair simple and cost-effective.
✅ Cost-Effective Alternative to OEM
Avoid expensive dealership replacements with this affordable, reliable kit. Provides the same level of protection as OEM-style boots at a fraction of the cost.
✅ Direct Fit for Most Jeep Models
Designed to fit most shaft diameters 19–28mm and CV joint outer diameters 56–110mm, covering common sizes found in Jeep Wrangler JK/JL, Cherokee, Grand Cherokee, Patriot, Compass, and Liberty. Works with both front and rear axles for on-road and off-road use.
✅ Durable & Long-Lasting Protection
Made of high-quality rubber material, these CV boots resist cracks, tears, and oil leaks, keeping dirt, water, and debris away from your CV joints. Helps extend the life of your drive axles and prevents premature wear.
✅ Complete Repair Kit
Each kit includes 2 CV boots, stainless steel clamps, and zip ties for a full installation. Everything you need to replace old, cracked boots without buying extra parts.
✅ Easy to Install
No special tools required for most installations. Designed for a secure fit with standard CV joint clamps, making DIY repair simple and cost-effective.
✅ Cost-Effective Alternative to OEM
Avoid expensive dealership replacements with this affordable, reliable kit. Provides the same level of protection as OEM-style boots at a fraction of the cost.
Package Included:
2 CV joint boot
4 stainless steel clamps
6 cable ties
2 CV joint boot
4 stainless steel clamps
6 cable ties
On Jun 10, 2026 at 23:18:13 PDT, seller added the following information: