Description:
Bicycle booster:Add a power assist unit to your bike and turn it into an electric bike in just 30 seconds. This bicycle power assist requires no tools and can be installed in just 30 seconds between the rear wheel and the seat post. The drive roller at the rear of the unit rotates the bike’s rear wheel to propel it forward, allowing you to switch between riding modes with ease.
Specifications:
- Gross weight/net weight: 3.3kg/2.8kg
- Product size: 305mm x 100mm x 117mm(12*3.94*4.61")
- Battery: 18V/10AH
- Motor power: 200W
- Maximum speed: 25Km/h
- Range: 50km (with full charge and moderate assistance. Actual usage may vary depending on terrain and load capacity.)
- Charging time: 5 hours
- Charger: Input: 100-240V, Output: 21V/2A
- Applicable road surfaces: urban roads, gravel roads, etc
- Suitable tire width:
Mountain Bike:1.5/1.75/1.95/2.15 inch
Road bike:25C/28C/35C/38C
- Suitable for bicycle seat post:25.4/27.2/28.6/30.4/30.8/31.6mm
- APP: Four power modes, battery level display, speed
Package Include:
One Set of Bicycle Booster
Note:
1. The Breakwind seatpost cannot be installed at this time; only round seatposts are supported!!!
2. Once the pedal assist system is turned on, it enters automatic assist mode. When the bicycle’s speed exceeds 5 km/h, the system automatically provides assistance.
To accelerate, increase your pedaling cadence; the assist power will increase accordingly until the speed exceeds 25 km/h, at which point it will no longer increase. At this point, with the assistance of the P.Wheel, you can maintain a maximum speed of 25 km/h by pedaling lightly.
To slow down, there are two methods:
a. Reduce your pedaling cadence
b. Squeeze the brakes
The assist power will decrease in proportion to the reduced speed. At this point, simply apply light pressure to the pedals, and P.Wheel will help you maintain the reduced speed.
If you ride through a wet section of the road, friction between the wheel and the assist wheel will decrease, causing the assist to weaken or fail. This is normal.