RAVOOY Pro Pre-Cut Front Windshield Protection Film For Honda Accord 2018-2022

Protect your original windshield with an additional layer of clear TPU film. Designed for everyday driving, RAVOOY Pro windshield protection film helps reduce direct exposure to road grit, small debris and surface wear while maintaining a transparent appearance.

This film is pre-cut for the listed vehicle’s front windshield. It is supplied as a vehicle-specific pattern, not a universal-size sheet.

Vehicle Fitment

• For Honda Accord 2018-2022
• Installation Position: Exterior surface of the front windshield

Please confirm your vehicle model, year, windshield shape and camera/sensor configuration before ordering. Contact us if you are unsure which windshield pattern your vehicle requires.

Product Features

Vehicle-Specific Pre-Cut Design

Pre-cut to the windshield pattern for the listed vehicle, helping simplify positioning and edge alignment during installation.

Optically Clear TPU

Transparent TPU adds a protective surface while preserving the clean appearance of your original windshield.

99.9% UV Blocking

Blocks 99.9% of UV rays, helping protect your vehicle’s interior from UV exposure.

Everyday Surface Protection

Creates an additional barrier between the original glass and everyday road grit, small debris and surface wear.

Impact Absorption

The flexible TPU layer helps cushion small road-debris impacts. Actual protection depends on impact severity and driving conditions; the film does not guarantee prevention of all chips, cracks or scratches.

Hydrophobic Finish

Helps water form beads on the film surface and supports easier routine cleaning.

Product Specifications

• Brand: RAVOOY Pro
• Product Type: Pre-cut front windshield protection film
• Material: Clear TPU
• Nominal Thickness: 6.5 mil / approximately 0.165 mm
• Finish: Transparent
• UV Blocking: 99.9%
• Surface Feature: Hydrophobic
• Fitment: Vehicle-specific pre-cut pattern
• Coverage: Exterior front windshield
• Warranty: 10 years
• Installation Tool Kit: Included

Package Includes

• 1 × Pre-cut front windshield protection film
• 1 × Spray bottle
• 1 × Towel
• 1 × Installation instruction guide
• 1 × Squeegee

The included installation tools assist with surface preparation, film positioning and smoothing.

Installation Overview

1. Clean the Windshield
   Thoroughly remove dust, dirt and residue. Use a clean towel as directed in the supplied installation guide.
2. Prepare and Position the Film
   Prepare and apply the installation solution according to the instructions. Position the pre-cut film and align it with the windshield edges and camera/sensor areas.
3. Squeegee the Surface
   Work from the center toward the edges to remove installation solution and trapped air. Follow the guide for the correct technique.
4. Check and Allow to Cure
   Inspect the film surface and edges. Allow the recommended curing time and follow the instructions for washing and wiper use after installation.

Professional installation is recommended for the best finish.

Care and Maintenance

Keep the film surface and windshield wiper blades clean. Dirt trapped beneath worn or dirty blades can mark the film. Follow the supplied aftercare instructions to maintain its appearance and condition.

Warranty and Support

This product comes with a 10-year warranty. Actual service life varies with installation quality, environmental exposure, driving conditions and maintenance. Please contact us for the applicable warranty terms or help confirming vehicle fitment.

Order Information

This listing is for the pre-cut front windshield protection film and the installation tools listed above. Replacement windshield glass is not included. The film is designed for the exterior front windshield of the specified vehicle.