FOXWELL JT600 Nozzle Cleaner 3000ML Ultrasonic Injector Cleaning Machine GDI TSI
FOXWELL JT600 Fuel Injector Tester & Cleaner is a professional 6 cylinders auto fuel injector testing cleaning machine. It is equipped with a pressure gauge which can make the test more precise and easier.Perfectly suit for removing carbon from gasoline cars and motorcycles fuel system, testing leaking, cleaning spark plug, testing injection of injector.
Function Explanation:
🏆1.Ultrasonic Cleaning
Ultrasonic cleaning is to use the penetrating and cavitation shock waves generated when ultrasonic waves propagate in the medium, and powerfully clean objects with complex shapes, cavities and pores to completely remove stubborn carbon deposits on the fuel injector.
🏆2.Fuel Injector Cleaning & Tester
This function is to detect the atomization, dripping, blockage, fuel injection angle status of the fuel injectors and the size and balance of the fuel injection of each fuel injector at different speeds.
🏆1.Ultrasonic Cleaning
Ultrasonic cleaning is to use the penetrating and cavitation shock waves generated when ultrasonic waves propagate in the medium, and powerfully clean objects with complex shapes, cavities and pores to completely remove stubborn carbon deposits on the fuel injector.
🏆2.Fuel Injector Cleaning & Tester
This function is to detect the atomization, dripping, blockage, fuel injection angle status of the fuel injectors and the size and balance of the fuel injection of each fuel injector at different speeds.
Main functions:
❤️INJECTOR TEST:Detect solenoid injectors resistance.
❤️ UNIFORMITY TEST: Inspect fuel injection of each injector by observing its uniformity.
❤️ SPRAYABILITY TEST: Inspect atomization of each injector by observing.
❤️ LEAKAGE TEST: Inspect the sealing conditions of the injector needle valve under system pressure and to find out the injector with oil droplet.
❤️ INJECTION TEST: Inspect injecting volume in 10 seconds meets the design specifications.
❤️ AUTO MODE TEST: Inspect the injectors according to the established program1 of the equipment.
❤️ VARIABLE SPEED TEST: Inspect the injectors in variable speed conditions.
❤️ ULTRASONIC TEST: Clean the carbon deposits inside the fuel injector through ultrasonic.
❤️ ON-VEHICLE CLEAN: Cleaning the engine fuel supply pipeline, injector, and combustion chamber with the machine does not require disassembling.
❤️ SYSTEM: Set the language and unit of the device operating system, query device information, and restore device factory settings.
❤️ DATABASE: Querying the working pressure of various vehicle models' fuel systems.
❤️ HELP: Querying device fault code information.
Other Features:
✔️Colorful LCD screen
✔️ Sensing button
✔️ Oil resistant glass operating panel
✔️ Digital pressure gauge
✔️ Auto regulate & stabilize the pressure
✔️ Standard test mode and professional test mode
✔️ Database for testing
✔️ 100w Ultrasonic Cleaning
✔️ Automatic Control/Real-time Monitoring
✔️ 4000ml/4L Large Capacity of Cleaning Tank
✔️ Multi Voltage Selection
✔️ Various Parts equipped
✔️ Environmental Friendly& Widely Use
Specifications:
Voltage：AC220V or 110VMain-unit Max Power：300W
Display: 4.0 inch LCD
Ultrasonic power：60W
Pulse range：0.5～25ms ，step 0.1ms
Simulated speed：100～9900rpm ，step100rpm
Resistance measuring precision: 0.1 ohm
Tank volume：3L
Oil pressure: 0~8 bar
Main unit size: 420X440X503mm
Ambient temperature：-10℃~+40℃
Package size: 460*490*555mm
Ambient Humidity：＜85%
Ambient magnetic strength：＜400A/m
Packing List :
• Main unit:1 set
• Ultrasonic cleaner cover:1 pcs
• Injector cleaning bracket:1 pcs
• Fuel distributor package:1 set
• 6-cylinder pulse signal cables:1 set
• Pulse signal connection cable1:6 pcs
• Pulse signal connection cable3:6pcs
• Pulse signal connection cable4:6 pcs
• Adaptor 1 for fuel top-supply injector:6 pcs
• Coarse thread adaptor for fuel top-supply injector:6 pcs
• Swiss thread adaptor for fuel top-supply injector:6 pcs
• Hexangular stopper:5 pcs
• Top Oil Supply Connector(10.8-11.8):6 pcs
• Knurled nut:2 pcs
• Adjusting pole(H160):2 pcs
• Pressing screw:2 pcs
• Adaptor for GDI injector(D16):6 pcs
• Top Oil Supply Connector(D17.5):6 pcs
• O ring (9.7*2.65):20 pcs
• Top Oil Supply Connector(D14.3):6 pcs
• Top Oil Supply Connector(D12.6):6 pcs
• Top Oil Supply Connector(D15.3):6 pcs
• Oil outlet adapter:1 pcs
• Tool box:1 pcs
• Power cable:1 pcs
• User's manual:1 pcs
HOW TO USE FOXWELL JT600 Ultrasonic ULTRASONIC FUEL INJECTOR CLEANER TESTER ?
ULTRASONIC CLEANING
1. Pour in cleaning solution and place the fuel injector into the ultrasonic cleaner.
2. Connect the pulse signal wire and select the ultrasonic cleaning function to start working
FUEL INJECTOR TEST
1. Pour in the test liquid and install the fuel injector onto the fuel distributor
Up and fix it to the main unit with bolts.
2.Test whether the fuel injector leaks or blocks under different functions
NOTE:
Testing solution and cleaning agent are liquids with different purposes. The test fluid is used for the main engine, and is used for uniformity/spray test, sealing test, and fuel injection quantity testing and automated testing.
Cleaning agents are used for ultrasonic cleaning. It is strictly prohibited to use water-based solvents in the host part, otherwise irreversible damage may occur.
Cleaning & testing sequences
Recommended to carry out the complete cleaning and testing procedures as the following order.
1. Ultrasonic cleaning;
2. Uniformity / Sprayability test;
3. Leakage test;
4. Injecting flow test;
5. Working modes test.
Procedure after work operation
1) Drain test solution to a fuel container.
2) Switch off the power switch and unplug the power plug.
3) Use a fuel header to suck all cleaning agent in the ultrasonic cleaning pool, and wipe the pool with a soft dry
cloth.
4) Wipe the table top of the machine with a soft dry cloth.
5) To avoid volatilization, all the test solution in the fuel tank should be discharged. If it can be used again, store it
in a safe place. If it is dirty and cannot be used any more, dispose it according to relevant regulations.
If you want to save trouble, or you are a novice, you can use the automatic test mode of foxwell JT600!
Auto mode test
The Auto mode test process includes all of the above tests (leakage test, 10-second injection test, high-speed test, medium-speed
test, idle test, acceleration&deceleration test). This function allows you to test a more comprehensive performance of the injectors by
simulating various engine conditions.
Operation Procedure (For more detailed steps, please refer to the manual.).
1) Before the test, if there is any test liquid in the glass tube, please press the "Drain" button to drain
it into the tank.
2) Select auto mode 1 in the main menu, then press the ENTER key to start the test.
3) According to the technical specification of the injector, press and to adjust the test
pressure.
4) When the test is finished, the procedure will stop automatically and the buzzer will beep.
You can also run any test function individually and set the parameters according to the test
requirements.
FAQ
1) The unit does not respond when the power is turned on.
Check the fuse on the lower right side of the unit and replace the fuse (5A) if it is damaged or broken.
2) Fuel distributor (rail) is leaking.
Check the o-ring and replace if damaged or broken. Do not tighten the adapter fitting too much,
otherwise, it may cause leakage.
3) When running, there is no working pressure.
When using a new machine for the first time, or if the machine has not been used for a long time, there may be no fuel
pressure. In this case, select the "first time use" function in the system functions, and then do the following:
a) Connect the test connector to the unit's fuel supply line and insert it into the fuel filler neck as shown in the illustration.
b) Then, run the first time use function.
c) When liquid comes out of the test connector, stop the operation. The device stops automatically after 30 seconds of operation.
4) There is no oil feed pressure, the buzzer sounds.
The machine has a lack of fuel warning function, when there is not enough fluid in the tank, the machine will beep, then
automatically shut down the fuel pump and injector nozzle, and return to the stop state. Add test fluid to the unit until the
buzzer stops beeping.
5) Completely emptying the test fluid from the glass tube requires pressing the Drain button several
times.
The solenoid valve will automatically stop after 15 seconds and will need to be emptied more times if more fluid is present.
Precautions
a) Do not place anything on the control panel to prevent breaking the test measuring cup/glass panel.
b) Do not disconnect the oil feed connection until the system pressure reaches "0" to prevent test fluid from spraying out.
c) Always ensure that the unit is reliably earthed when in use.
d) The device has a lack of oil alarm function. When the liquid level falls below the minimum line, the device will emit a warning
sound and at the same time automatically stop the oil pump and injector nozzle work. Until the test liquid is sufficient, the
equipment will be able to work normally.
e) Clean the control panel in time, pulse signal line please ask stained test liquid, cleaning agent.
WARNING
Do not disassemble this equipment for servicing without authorized personnel. Damage resulting from this is not covered
by the warranty. In the energized state, there is strong electricity inside the device and the housing must not be opened. It is
strictly forbidden to repair the equipment with electricity! All injuries resulting from violation of this warning are not
covered!
Arrangement after use
a) It need to do some job as below after use.
b) Press the "Drain" icon to drain the test fluid into the fuel tank.
c) Turn off and pull of the power plug.
d) Clean the machine with a soft cloth.
e) Drain the test fluid from the fuel tank into a container to avoid evaporation. If reuse, store the it in a safe place and dispose of it
according to the relevant regulations if it is too dirty
