SKU:1500W-6090T1-USB-B+1500W-6090T2-USB-B+TS009USB
Description
Router engraving machine parameters:
Model: 6090GZ
Outside dimension:1150*970*650mm(L*W*H)
Working platform size:1045*720mm(L*W)
Frame MaterialThe whole machine used 6061 aluminum profiles
Max. Feeding height:≤140mm(From base of Z axis to platform)
X,Y,Z Working Area:900(Y)*600(X)*140mm(Z)
Sliding unit:
X axis:SFU1605 Ball Screws
Y axis:SFU1605 Ball Screws
Z axis:SFU1204 Ball Screws
Drive unit:
X axis:ø20 High intensity round rail,
Y axis: SBRø20 high-strength aluminum base rails
Z axis: ø12 high-strength round rail
Stepping motor57 two-phase 3A (with handwheels)
Driving Power for Stepping motorAC110, 240W, out put:DC24V10A
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Spindle motor:1500W high-speed variable frequency spindle motor , ER11 chuck, with 6mm collet.
tips1,The spindle motor must connect with the VFD.2,It cannot directly connect with the supply voltage (AC110V/220V).3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.)
Drive of Stepping motor:0-3.5A adjustable four-axis drive
(TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision)
Repositioning precision:≤0.05mm
Cooling:Water-cooling
2Water cooled spindle motor has higher stability and better concentricity than air cooled motor.
Speed:0-24000r/m
Spindle precision:Radial runout ≤ 0.03mm
Carving command:G code / TAB file / nc file / NCC file
VFD:AC220V, 1500W, 0-400Hz (built-in control box)
USB Control box parameters
Protection:Emergency stop button
Communication interface:through USB PORT connect with computer
support system:Windows XP / win7 with 32bite
Input Volts:AC220V
Application industry:
Woodworking industry: sculpture, round carving, wooden handicraft processing
Advertising industry: advertising signs, logo making, cutting acrylic , plastic molding, suit for making a variety of materials advertising decorative products
Other industries: The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry,such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter , making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet.
Feature:
1,The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood.
2,water cooling spindle works more stable and durable.
3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.
How to use
1.Assembling and locating the machine on steady desk well.
2.Make sure that your computer has a USB port output.
3. Place the control box in a ventilated dry place where there is no dust,no moisture
4.Connecting the control box with the machine and you computer and make sure the plug will not come off.
5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will
damage the driver of the controller.
6.Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current tocheck whether the water-cooling system working well.
7. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.
8.You can enjoy making you dream with using our machine now.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
