1pc Radiator For 2007-2011 Toyota Camry 2005-2012 Avalon 2006-2019 Venza 3.5L CU2817
Specifications
Length(cm): 80.0, width(cm): 15.0, height(cm): 60.0
Weight(kg): 4.5
Material: Plastic Aluminium
Color: Silver
Placement on Vehicle: Front
Core Material: Aluminium
Tank Material: Plastic
Bottom Header: 2" x 31.43
Core Height (IN): 30.14
Core Length (IN): 15.75
Core Thickness (IN): 0.63
Inlet Diameter (IN): 1.36
Outlet Diameter (IN): 1.36
Top Header: 1.42" x 31.43
Interchange Part Numbers
CU2817
DPI 2817
A2817
RAD2817
Q2817
16400-AD010
TO3010300
16400-0P220
16400-AD020
TO3010313
16400-31520
Fitment
For 2005 - 2012 Toyota Avalon 3.5L (Except Towing Package)For 2007 - 2011 Toyota Camry 3.5L (Except Towing Package & Vehicle Built In USA)For 2009 - 2016 Toyota Venza 3.5L (Except Towing Package)
Features
Built to strict quality control standards 100% factory tested
ISO9001IATF 16949EAC
Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
Mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability.
Perfect match for the original car.
The Core was made from high quality Aluminum.Effective heat dissipation.
Good sealing.
Direct Replacement, easy to be installed
Attention
1. The radiator cap that has not passed the test can’t release the pressure when it reaches the pressure value.2. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.3. The radiator fan does not turn, resulting in high temperature in the water tank.4. Drain the air from the cooling system. Refer to the user manual or repair manual.5. Please refer to owner's manual to add coolant.6. Do not open the hood until the steam has subsided. The engine compartment may be very hot, causing serious injuries such as burns.7. Please stop the vehicle immediately, when “ENGINE OVERHEAT/High Temperature” shows on the dashboard or steam comes out from under the hood.8. Keep hands and clothing (especially a tie, a scarf) away from the fans and belts. Failure to do so may cause the hands or clothing to be caught, resulting in serious injuries.9. Do not loosen the radiator cap while the engine and radiator are hot. Serious injuries, such as burns, may result from hot coolant and steam released under pressure.
Note
1.It will be better if you can check with that above chart to make sure if this radiator will fit your vehicle.2. The radiator cap that has not passed the test can't release the pressure when it reach the pressure value.3. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.4. The radiator fan does nont turm, resulting in highh temperature in the water tank.5. After loading the product on your vehicle and adding the coolant, tighten the rotary cover and leave your vehicle idling for 10-20 minutes. After completely cooling the coolant, open the cover and fill the product with coolant. Please make sure there is no gas in the product.6. Before you start up your vehicle, please make sure there is coolant in the radiator.
