Fuel injector diagnose equipment is a mechatronic product that combines mechanical and microcomputer signal output technology. This product simulates various operating conditions of the engine, and inspect the fuel injectors of various motorcycles & cars

 Main Functions

(1) Uniformity Test: to check uniformity of the injections.
(2) Atomization Observation: with help of the backlight, you can observe the spray atomization situation of the injector in a comprehensive and careful manner.
(3) Tightness Test: it can detect the tightness and dropping of the fuel injector under working pressure.
(4) Fuel Injection Volume Detection: it can detect the fuel injection volume of the injector under specific working conditions.

Main Features

(1) Low-cost solution of injection test.
(2) Use pressurized air to push test fluid, ensure stable pressure output,
achieve consistence in test conditions.
(3) DC12V power supply, enhance portability of the product.
(4) The oil tank liquid level is displayed visually, and the test agent can be
recycled.
(5) Bright background light, you can clearly see the various situations of the
fuel injector when it is working.
(6) Replaceable composite joints for different injector type.

Technical Specifications

Power Supply: DC12V Vehicle Battery, 2Amp

Relative Humidity: <85%

Environment Temperature: -5oC ~ + 50oC

Tank Capacity: 150ml

Cylinder Volume: 100ml

RPM: 100~9900 step 100

Time: 30~600 Seconds

Oil Pressure: 1.2~1.5bar (Fixed)

Pressure Relief: Manual

Operating Instructions

1. Button Functions:

a) -: Time adjustment / Speed adjustment.

b) +: Time adjustment / Speed adjustment.

c) MODE: Mode key, cycles through modes (Manual mode M, Automatic mode A).

d) START: Start/Stop key, short press to start when stopped, short press to stop when running.

2. Indicator Functions:

a) M: Manual mode.

b) A: Auto Mode.

3. Operation Instructions:

a) In stopped state, briefly press “MODE” to switch to M mode. Use “+/-” keys to adjust output speed (range: 100-9900 RPM). Briefly press “START” to activate operation at set speed.

b) In stopped state, briefly press “MODE” to switch to A mode. Use “+-” keys to adjust timer duration (30-600 seconds). Briefly press “START” to activate. Speed automatically adjusts within 500-6000 RPM range at +/-100 RPM increments every 0.5 seconds, stopping automatically upon countdown completion.