|
Do You Have Following Problems? You will be able to Accurately detect the location of the leak, when you encounter the following situation. Foxwell ST201 Introduction:
FOXWELL ST201 is an entry-level pipeline leak detection tool. It can quickly and accurately locate leaks in any pipeline system, help technicians and automotive users quickly solve problems, and reduce diagnostic time. 
Foxwell ST201 Main Selling Points:
1. Small size,patented technology, quality and after-sales support 2. Smoke is environmentally friendly and non-toxic 3. Built-in control circuit board 4. Built-in air pump 5. 0.8-1.2bar output 6.Smoke Mode: the smoke mode can pinpoint exactly where the leak is happening. 7.Equipped with Liquid Level observation port 8.Rich accessories 9.Overheat & Anti-frost Protection 10.Wide Range of Applications: suitable for detecting pipeline system leaks on cars, motorcycles, snowmobiles, beach bikes, light trucks, heavy-duty trucks, and speedboats. Supports all 12V vehicle batteries. Support Multi-system Test EVAP System Test
More Features of ST201
Built-in Air Pump
Engineered for ease, ST201 eliminates the need for external gas sources, offering swift setup and immediate functionality. The built-in pump ensures efficient operation while enhancing portability, allowing you to effortlessly move the smoke tester automotive wherever it's needed. 
Wide Range of Applications
Suitable for detecting pipeline system leaks on cars, motorcycles, snowmobiles, beach bikes, light trucks, heavy-duty trucks, and speedboats. Supports all 12V vehicle batteries. 
Overheat and Antifreeze Protection
The smoke detector is equipped with the latest intelligent protection devices. When the temperature of the equipment exceeds 75 degrees Celsius, the power protection device will intelligently start and shut down to ensure the safety of the operator and equipment. If the device operates continuously for more than 15 minutes, it will be protected from overheating for a protection time greater than 10 minutes. This device is also suitable for low-temperature operation. Only car batteries with a full capacity of 12V are supported. How To Use It? 1. Inject 10ml-20ml of test oil into the smoke leak detector, filling 20ML of test fluid, under standard working conditions, can be used continuously for about 10 minutes; (about Smoke Oil: advise use the Baby oil) Caution:
1. When you use this Foxwell ST201 Car Smoke Leak Detector for the first time, fill with 10-20ml baby oil. Please be careful NOT to beyond this range. 2. Fresh oil can be filled with only when the smoke gets thin, and it can't be filled over 20ml each time. 3 . Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly. 4. During the process of leak detection, please keep away from smoke-sensitive parts. 5. Do NOT run the detector over 8 minutes continuously. It needs interval rest. 6. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later. 7. The round part of this detector has temperature, please be careful to avoid burns. 8. If the test pipe needs to be disconnected in the middle, please sE~Ure the other side with a rubber stopple. Packing List: 1pc Foxwell ST201 Main Unit
|
