CAR BACKUP CAMERA RAIN SHIELD ACTS AS AN UMBRELLA FOR YOUR BACK-UP CAMERA

Product Attributes

Colors: Black

Sizes: 3.76*0.69*0.68 inch 

Effective Adhesive Area: 3.71*0.63 inch 

Hollow Width: 16 mm

Weight: 0.49 oz

Material: Silicone

Packaging: Backup Camera Rain Shield*1, Replacement Adhesive Backing*1 

Package Size: 4.51*3.9*0.6 inch

Warm Tips

1. Attention, please check the size and effective adhesive area of the product carefully before buying

2. It is not suitable for flat surfaces where the space above the camera is too narrow or not at a vertical angle

3. Not compatible with Mini Cooper, Tesla Model 3/Y, etc

4. Please check if there is enough space at the camera location to install the protective cover

Product Functions & Features

1. The car backup camera rain cover stops rain from splashing directly onto the backup camera lens by physically blocking it, improving your safety when backing up

2. The adhesive backing of the car rear view backup camera cover has been specially treated to keep the surface of the car body without leaving unsightly adhesive marks even after tearing it off after a long period of use

Precautions for Use

1. Cleaning before sticking is the core premise to improve the adhesive effect, you need to thoroughly clear the dust in the installation area

2. The adhesive backing can be warmed up according to the situation

Important Compatibility: Our car rear view camera rain shield is explicitly not compatible with Mini Cooper, Tesla Model 3/Y and explicitly does not work on flat surfaces where the space above the camera is too narrow or not at a vertical angle
Wider and Longer: Our car backup camera rain shield has a unique wider and longer design, with a hollow center (about 16 mm wide), which effectively intercepts the rain water above and significantly improves the clarity of the reversing image in bad weather
Non-marking Adhesive Backing: Our car backup camera rain cover has an effective adhesive area of 3.71*0.63 inch, the adhesive backing is not easy to leave hard-to-clean adhesive marks when it needs to be taken off in the future, which keeps the mounting surface clean
Flexible Silicone: The use of silicone as the main material of the car backup camera rain cover, has a good temperature adaptability, can be used for a long time to maintain the flexibility and shape, will not be easily softened and deformed or hardened and brittle cracks
Mounting Method: 1. Wipe the mounting position clean. 2. Peel off the protective film on the backing of the car rear camera rain cover, and you can warm up the adhesive backing. 3. Stick the car rear camera rain cover to the corresponding position, and then press firmly at last