This interchangeable tap chuck adaptor can be used with any 1/4'' drive manual wrenches and ratchets.

The jaw can be easily adjusted using only one tapping adaptor, making it suitable for tap sizes ranging from M3 to M8

●It's designed to allow spokes to be replaced in accordance with the wheel manufacturers specifications and set to the correct torque.

●Over or under tightening of spokes can easily lead to excessive radial & lateral runout.

●Always check radial & lateral runout when replacing spokes & set the torque to the manufacturers specification.

●Applications include, but are not restricted to: BMW, KTM, Ducati & Excel Rims.

●Contents:

1 x Torque wrench 1-7Nm.

10 x interchangeable spoke wrench heads:

5.1, 5.6, 5.8, 6.1, 6.3, 6.5, 6.7, 6.8,6.9 mm & Spline type.