Kicker 52CVR104 CompVR 10" Subwoofer Car Audio Sub 375W RMS 4 Ohm DVC
SKU:KIC-52CVR104
Specifcations:
- 10" Dual 4 ohm CompVR Series Subwoofer
- Power Handling:
- Injection Molded Polypropylene Cone
- ISD (Inverted Structural Dome) to minimize cone flex and lower distortion
- Santoprene Rubber Surround
- Large diameter and progressive roll spider for linear cone movement
- Rear cone brace for added strength and resistance
- Optimized Santoprene ribbed surround radius for more bass output
- Sleeved high-power tinsel lead wires to eliminate power loss
- Spring-loaded nickel plated terminals for smooth connection
- One-piece Uniplate with vented hyper-extended pole piece and backplate
- Enhanced BAM (Basket and Motor) Assembly
- Perimeter venting in the BAM to relieve pressure under the spider
- 2" High Temperature Copper Voice coil on polyimide former
- 12.73 mm Xmax
- 43.23 oz. Double Stacked Ferrite magnet motor structure
- Frequency Response: 25 - 500 Hz
- Resonance Frequency (Fs): 33.2 Hz
- Sensitivity: 83.6 dB
- Recommended sealed box volume: 0.8 cubic feet - 3.0 cubic feet
- Recommended ported box volume: 1.25 cubic feet - 1.75 cubic feet
- Top-mount depth: 5-1/2"
- Cutout diameter: 9-3/16"
The Kicker 52CVR104 CompVR 10-inch subwoofer is designed for clean, reliable bass in a wide range of car audio systems. With a 375W RMS rating, it pairs well with many mono amplifiers and can deliver strong low-frequency output when installed in the right enclosure. The 10-inch size is a solid choice for balanced bass performance without requiring a large box.
This model features dual 4 ohm voice coils, giving you multiple wiring options depending on your amplifier’s stable load. Proper enclosure volume and tuning play a major role in performance, whether you prefer a sealed setup for tighter punch or a ported design for more output. Set gain, crossover, and subsonic filtering correctly to keep response clean and consistent.
For best results, mount the subwoofer to a rigid, well-braced enclosure and use appropriate gauge wiring and secure connections. A solid installation helps reduce unwanted vibration and supports long-term performance. Check your available mounting depth and cutout requirements before installing. This CompVR is a dependable option for building a daily-driven bass system with flexible wiring.
SKU:KIC-52CVR104
Specifcations:
- 10" Dual 4 ohm CompVR Series Subwoofer
- Power Handling:
- Injection Molded Polypropylene Cone
- ISD (Inverted Structural Dome) to minimize cone flex and lower distortion
- Santoprene Rubber Surround
- Large diameter and progressive roll spider for linear cone movement
- Rear cone brace for added strength and resistance
- Optimized Santoprene ribbed surround radius for more bass output
- Sleeved high-power tinsel lead wires to eliminate power loss
- Spring-loaded nickel plated terminals for smooth connection
- One-piece Uniplate with vented hyper-extended pole piece and backplate
- Enhanced BAM (Basket and Motor) Assembly
- Perimeter venting in the BAM to relieve pressure under the spider
- 2" High Temperature Copper Voice coil on polyimide former
- 12.73 mm Xmax
- 43.23 oz. Double Stacked Ferrite magnet motor structure
- Frequency Response: 25 - 500 Hz
- Resonance Frequency (Fs): 33.2 Hz
- Sensitivity: 83.6 dB
- Recommended sealed box volume: 0.8 cubic feet - 3.0 cubic feet
- Recommended ported box volume: 1.25 cubic feet - 1.75 cubic feet
- Top-mount depth: 5-1/2"
- Cutout diameter: 9-3/16"
The Kicker 52CVR104 CompVR 10-inch subwoofer is designed for clean, reliable bass in a wide range of car audio systems. With a 375W RMS rating, it pairs well with many mono amplifiers and can deliver strong low-frequency output when installed in the right enclosure. The 10-inch size is a solid choice for balanced bass performance without requiring a large box.
This model features dual 4 ohm voice coils, giving you multiple wiring options depending on your amplifier’s stable load. Proper enclosure volume and tuning play a major role in performance, whether you prefer a sealed setup for tighter punch or a ported design for more output. Set gain, crossover, and subsonic filtering correctly to keep response clean and consistent.
For best results, mount the subwoofer to a rigid, well-braced enclosure and use appropriate gauge wiring and secure connections. A solid installation helps reduce unwanted vibration and supports long-term performance. Check your available mounting depth and cutout requirements before installing. This CompVR is a dependable option for building a daily-driven bass system with flexible wiring.
Although many orders are shipped the same day that we receive them, due to a variety of factors it can take up to 24 hours to process your credit card information and ship your order. FedEx picks up shipments daily, Monday through Friday around 4:00 PM (Eastern Time). They DO NOT operate on weekends or holidays. If you place an order for shipping on Friday night, the next available shipping day is Monday.
We are here to help! Our customer service staff will be glad to assist you with any questions or concerns you may have. We have a service member available 5 days a week to answer your questions.
You can call us from Monday through Friday from 8:30AM - 9:00PM Central Standard Time or Saturday through Sunday from 10:00AM to 7:00PM Central Standard Time.
You can also email us and one of our friendly staff will get back to you usually within one to two hours. All emails are answered in the order they are received and we do answer them all. Include your invoice # and email address with all emails. Please make sure to check your junk mail filter for replies. Sometimes email programs will accidentally place our emails in your junk mail folder.
- We are not responsible for any shipping and/or handling charges to return an item to HiFiSoundConnection. We will pay the shipping of replacements back to your location.
- Your refund will be subject to a 20% restocking fee with a $10.00 minimum fee.
- If exchanging you will NOT be subject to the 20% restocking fee. You WILL have to pay the return shipping costs.
- We doNOTrefund the amount you paid for shipping, duties, taxes, or any other charge incurred getting the item to your location.
- We reserve the right to charge a 35.00 flat fee on warranty / exchanges if the original product packaging is not included.
- Other fees associated with items not included with the returned merchandise such as bass knobs, fuse holders, manuals, etc that were not included with the package are also subject to additional fees depending on the item not returned.
- All returns require an RMA (return merchandise authorization) number. Any packages sent back without an RMA number will be delayed and possibly rejected. Please contact us to obtain an RMA number.
- All returns will be tested before any refund is given.
- All International Sales are final, the return/exchange policy does not apply to International orders
- The return policy does not cover damage due to improper installation, if an item was physically altered by you, or services performed by anyone other than HiFiSoundConnection.
- We are not responsible for any shipping and / or handling charges to return a defective item to HiFiSoundConnection.
- We will pay for the shipping on the replacement product going back to your location.
- We reserve the right to refer you to the manufacturer for any warranty exchanges.
- We reserve the right to switch you to a comparable product if the original product is out of stock or discontinued.
- We will not send your replacement item until we have received and checked in the defective product, this may take up to5 business days. All returns will be tested before any refund is given.
- Any item that is returned MUST first have RMA (return merchandise authorization) number before sending the package, if the package does not have an RMA number clearly on the outside of the return packaging it will be automatically refused. Please contact us to obtain an RMA number.
- Subwoofer Exception: Our warranty does not cover blown voice coils, or subwoofers that have been punctured. This is considered abuse by the manufacturer and is not covered under warranty.
- Defective items cannot be returned for a refund.
- All International Sales are final, the return/exchange policy does not apply to International orders
- The return policy does not cover damage due to improper installation, if an item was physically altered by you, or services performed by anyone other than HiFiSoundConnection.
