Freely programmable 3-axis gyroscope system for all RC surface models. To have the perfect feeling about your model at any time is every pilot's dream. The WINGSTABI makes this possible and leaves nothing to be desired in terms of handling, adjustment and function for beginners and professionals alike. Thanks to the latest generation of high-precision 3-axis MEMS sensors, the feeling of flying remains realistic even under extreme control and does not give the impression of flying a robot. The design housing made of anodized aircraft aluminum can be installed in any position in the model. The WINGSTABI can be programmed quickly and easily on a PC or via app on any Android-based smartphone or tablet. The WINGSTABI can be programmed quickly and easily on a PC or via app (Bluetooth module #45188 required) on any Android-based smartphone or tablet. Features: The WINGSTABI turns any simple remote control into a freely programmable RC system Trilingual software: German, English, French Sensitivity of the 3-axis axes can be adjusted separately or together via the transmitter Change factor per axis can be varied 7/9 servo outputs The function can be freely assigned for each servo and is therefore suitable for every model application 4 flight phases: 1. on/off; 2. stabilization for flying in wind; 3. aerobatics and 3D flight; 4. torques (rock? n roll at the square) Delta mixer, V-tail mixer and flap support Flaps can reinforce ailerons Real-time sensor diagram in the PC software dimension L/W/H 54x34x15mm Weight without integr. Receiver 27 g Weight with integr. Receiver 35 g Operating voltage 3.5 V... 9.0 V
Every pilot dreams of having the sensation of perfect control over his model at all times. TheWINGSTABImakes this possible, and ticks every possible box for beginners and pro-standard flyers alike in terms of handling, setting up and functions.
The WINGSTABI is also compatible with all current RC systems: Graupner, Futaba, M-Link, Jeti, HiTEC, Weatronic and others.The latest generation of ultra-precise triple-axis MEMS sensors ensures that the sensation of flying remains realistic even at extremely high rates of stabilization, and the pilot never has the impression of flying a robot. The sleek case, made of anodized aircraft aluminum, can be installed in any orientation in the model. The WINGSTABI is straightforward and swift to program using a PC or an app with any Android smartphone or tablet. The WINGSTABI is straightforward and swift to program using a PC or an app (Bluetooth -Module #45188 needed) with any Android smartphone or tablet.
Features:
The WINGSTABI makes any simple radio control set into a fully programmable RC system
Gain (sensitivity) on all three axes can be varied separately or jointly from the transmitter
Variation factor can be set separately for each axis
7 / 9 servo outputs
The gyro function is freely assignable for each servo, i.e. the unit caters for every model application
Four flight phases: 1. On / Off; 2. Stabilization for flying in windy conditions; 3. Aerobatics and 3D flying; 4.Torque-rolling (rock‘n‘roll at the flying site)
Delta mixer, V-tail mixer and flap – aileron mixer
Variable flap - aileron mixer ratio
Aileron control superimposed on flaps for stabilization
Real-time sensor diagram in the PC software
Since their founding in 1958,Multiplexhas developed topRC Radio Systemsfor the RC Industry! With the current 2,4 GHz TechnologyM-LINKandtelemetry system, Multiplex has put itself in front of the RC Industry in Germany. Since the early 2000s Multiplex began producing finished models made fromElapor, a high-tech particle foam, which settled a milestone in the RC Airplane, as well as in the Helicopter (Funcopter) sectors. Since 2002, Multiplex has been owned by the south korean HiTEC group and has become one of the leading RC manufacturers in the world!