This subwoofer was designed to be a great combination of price and performance without a compromise on quality. It is a must-have for daily builds where you want to keep electrical upgrades to a minimal and get excellent performance with a minimal amount of power.
- Bass machine that will reproduce low-end frequencies with authority with small amount of power
- 4 layer high-temperature copper voice coil capable of handling 1000 watts RMS program power, which makes high acoustic output
- High roll U surround gives an 17.5 mm of Xmax for low bass reproduction without any issues
- Side forced cooling system with vented back plate design for better heat dissipation
- Dual 4 Ohm, easy setup to connect two subs in parallel to 1 ohm
Recommended Custom Enclosures: Inside measurements based with 3/4″ wood material.
Single Sub Sealed Enclosure 47 Hz Tunning
All sealed-enclosures should be filled to 50% of poly-fil.
| Volume | Box Suggestion | Port Size |
|---|---|---|
| 1.0 ft3 | 12.5”x13.5”x10.5” | N/A |
Single Sub Compact Ported Enclosure 36 Hz Tunning
| Volume | Box Suggestion | Port Size |
|---|---|---|
| 2.0 ft3 | 12.5”x19”x15” | Slot Port 12.5”x1.50” by 22″ Total Length |
Dual Sub Recommended Ported Enclosure 32 Hz Tunning
| Volume | Box Suggestion | Port Size |
|---|---|---|
| 4.2 ft3 | 12.5”x34”x17” | Slot Port 12.5”x3” by 28″ Total Length |
GENERAL SPECIFICATIONS
| Nominal Diameter | 12″ (305 mm) |
| Nominal impedance | 4 + 4 Ohm |
| Nominal Power Handling | 500 Watts |
| Continuous Program Power (RMS) | 1000 Watts |
| Max Peak Power | 2000 Watts |
| Sensitivity 1.41V at 1m | 86 dB (Parallel VC) |
| Voice Coil Diameter | 2.6″ (65.5 mm) |
| Voice Coil Wire | Copper |
| Voice Coil Winding Depth | 40.0 mm |
| Former Material | Black Aluminum |
| Magnetic Gap Depth | 10.0 mm |
| Frame Material | Stamped Steel |
EXTRA INFO
| Overall Diameter | 12.50″ (317.5 mm) |
| Front Mount Baffle Cutout | 11.42″ (290 mm) |
| Mounting Depth | 6.77″ (172 mm) |
| Overall Depth | 7.75″ (197 mm) |
| Net Weight | 21.56 Lbs (9.78 kg) |
| Shipping Weight | 25.35 Lbs (11.50 kg) |
| Carton Dimensions W x L x H | 13.78″ x 13.78″ x 8.66″ (350 x 350 x 220 mm) |
Our engineering team focused on achieving a deep bass response, making our bass amplifiers have a completely different response than our full range amplifiers! Featuring an overbuilt power supply on a heavy-duty PCB board, this amplifier takes performance to the next level with consistent power output.
- Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly
- Smart Bass Amplifier – Monoblock 1 Channel 900 watts at 2 Ohm TRUE RMS certified. Intelligent 4-way protection circuitry features high voltage, low voltage, shortage, and current protection. Built-in Clip LED indicators on the top panel.
- Manufactured with the highest quality components, such as Tiffany RCA inputs that are extreme vibration resistant, it assures a flawless audio connection and heavy duty high current flow 4 gauge power inputs and 10 gauge speaker outputs.
- High Capacitance Reserve – Large capacitor bank designed to store more energy and provide a consistent bass, capable of astonishing power output over 900 Watts. Operating Voltage 9 to 16 volts.
GENERAL SPECIFICATIONS
| Impedance | 2 Ohm |
| Channels | 1 Channel |
| Rated RMS Power at 14.0 V at 2 Ohm | 900 Watts |
| Rated RMS Power at 14.0 V at 4 Ohm | 710 Watts |
| Average Efficiency | 80% |
| Operating Voltage | 9 to 16 Volts |
| Musical Current Draw | 40 A |
| Minimum Power Wire Input | (OFC) 4 Gauge |
| Protection Fuse or Circuit Breaker | 60 Amps |
| Minimum Speaker Wire Output | 14 Gauge |
| Frequency Response(-3dB) | 10 – 200 Hz |
| Min. Input Sensitivity for Max. Output | 200 mV |
| Signal Input | 1 Pair RCA |
| Signal to Noise | >90 dB |
| Protection System | Shortage on Output |
| Heat Sink Type | Heavy Duty Cast Aluminum |
| Dimensions ( W x D x H ) | 6” x 6.25” x 2.25” |
| Weight | 2.70 Lbs |
Popular Installation configurations with this amplifier:
Configuration for DUAL 4 Ohm subwoofer, its high power output channel allow you to install 1x subs in parallel at 2 Ohm, giving up to 900 watts to the sub.
