Product View
Detail
Sliding door stopper with skip function for Ducato 250 (since 2006), Citroen Jumper, Peugeot Boxer, and similar models.
If you have any questions, please contact us immediately. We will respond to you within 24 hours on business days and provide you with the best solution to ensure your satisfaction.
This stopper is mounted at the desired location where the sliding door is to be stopped, or at an existing location where a door stopper was previously installed (so that the existing hole can continue to be used).
Function:
If the door is only leaned against the stopper, it remains in this position.
If the door is closed with a little more force, the standard holder jumps over the stopper and the door closes.
The jump function is only intended for emergencies, in case you forget to pull the door handle when closing.
The jump function is only intended for emergencies, in case you forget to pull the door handle when closing.
If you have a stopper without a jump function, you will be familiar with the noise the door makes when you forget to pull the door handle when closing, thus preventing anything from bending or breaking.
Instructions:
To install, pre-drill with a 2 mm steel drill bit (use the stopper for marking) and then install with the supplied drill screw, tightening to approx. 2 Nm so that the screw head is at the same height as the stopper.
Safety note: If the sliding door does not automatically jump over the stopper, it must be removed again to prevent damage!
There are design-related tolerances or previous damage to the door mechanism where the stopper does not work. If this occurs, please report it. There is a separate solution for this, but it only occurs in less than 0.2% of cases.
There are design-related tolerances or previous damage to the door mechanism where the stopper does not work. If this occurs, please report it. There is a separate solution for this, but it only occurs in less than 0.2% of cases.
The shape may vary depending on the version; improvements are constantly being made, and you will always receive the latest version.
Scope of delivery: 1x door stopper, 1x drill screw
Material: PETG
As I am a camper myself, this detail bothered me; most other solutions are glued or attached with a magnet, which is not a long-term solution.
Copyright © 2017 DataCaciques
Store Categories
Product View
Detail
Sliding door stopper with skip function for Ducato 250 (since 2006), Citroen Jumper, Peugeot Boxer, and similar models.
If you have any questions, please contact us immediately. We will respond to you within 24 hours on business days and provide you with the best solution to ensure your satisfaction.
This stopper is mounted at the desired location where the sliding door is to be stopped, or at an existing location where a door stopper was previously installed (so that the existing hole can continue to be used).
Function:
If the door is only leaned against the stopper, it remains in this position.
If the door is closed with a little more force, the standard holder jumps over the stopper and the door closes.
The jump function is only intended for emergencies, in case you forget to pull the door handle when closing.
The jump function is only intended for emergencies, in case you forget to pull the door handle when closing.
If you have a stopper without a jump function, you will be familiar with the noise the door makes when you forget to pull the door handle when closing, thus preventing anything from bending or breaking.
Instructions:
To install, pre-drill with a 2 mm steel drill bit (use the stopper for marking) and then install with the supplied drill screw, tightening to approx. 2 Nm so that the screw head is at the same height as the stopper.
Safety note: If the sliding door does not automatically jump over the stopper, it must be removed again to prevent damage!
There are design-related tolerances or previous damage to the door mechanism where the stopper does not work. If this occurs, please report it. There is a separate solution for this, but it only occurs in less than 0.2% of cases.
There are design-related tolerances or previous damage to the door mechanism where the stopper does not work. If this occurs, please report it. There is a separate solution for this, but it only occurs in less than 0.2% of cases.
The shape may vary depending on the version; improvements are constantly being made, and you will always receive the latest version.
Scope of delivery: 1x door stopper, 1x drill screw
Material: PETG
As I am a camper myself, this detail bothered me; most other solutions are glued or attached with a magnet, which is not a long-term solution.
★ Your parcel will be dispatched within 2-5 business day after the payment is clear（Please see ebay logistics processing time for details）
★ Once you purchase, please DON’T leave negative or neutral feedback or file a claim if you haven’t received item within ebay timeframe, just contact us through ebay message.We will provide you with a satisfactory answer
We can accept Paypal, Google Pay, Apple Pay, credit card payments and many other payment methods.
Out 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. In addition , it allows customers to return new and unused products in their original factory condition for any reason within 30 days from the date of purchase.