THESE STICKERS ARE CUT USING PREMIUM VINYL. ALL DECALS ARE MADE TO ORDER AND IS BRAND NEW. ALL ORDERS PLACED WITHIN BUSINESS DAYS WILL RECEIVE TRACKING NUMBER WITHIN 24 HOURS!



THE PHOTO IS JUST FOR REFERENCE OF DESIGN AND NOT FOR REFERENCE OF SIZE. ALL APPLICATIONS ARE DIFFERENT SIZE. PLEASE MEASURE YOUR APPLICATION AND ORDER THE SIZE YOU NEED. EACH ORDER WILL COME IN THE SIZE YOU CHOOSE. IF THE SIZE YOU CHOOSE SAYS "(2 DECALS) THEN YOU WILL RECEIVE 2 DECALS. IF THE SIZE YOU CHOOSE SAYS "(1 DECAL ONLY)" THEN THAT ORDER WILL COME WITH ONLY 1 DECAL.



PLEASE MEASURE YOUR APPLICATION TO ENSURE THE SIZE YOU NEED. 
WE ARE NOT RESPONSIBLE IF THESE DECALS DO NOT FIT YOUR APPLICATION. 
CUSTOM SIZE IS AVAILABLE UPON REQUEST!
**IMPORTANT**



Our Materials:
We use only the best materials. Don't get tricked by the companies using cheap materials. The adhesive is made of a permanent solvent base polyacrylate (acrylic) which offers greater adhesive characteristics while still being able to remove the decal once it's no longer desired. The vinyl thickness ranges from 2-3 mils thick depending on the material. 

Application Instructions (if the decal has transfer film):
1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker.
2. Clean and dry the desired area.
3. Remove the paper backing slowly making sure the sticker stays adhered to the transparent transfer tape.
4. Spray the area with 2% soap and 98% water.
5. Carefully position the sticker to the desired area. The water will allow the vinyl to be re-positioned. 
6. Use a squeegee/credit card and rub the sticker from one side to the other, eliminating any air bubbles and water that is trapped underneath. Continue until the adhesive adheres to the vehicles surface.
7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
8. You may use blow dryer to soften the adhesive some more and rub the sticker so it will adhere better.
9. Check for air bubbles. In most cases air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible.
10. Wrap the vinyl around the edges and use a blow dryer to dry off the remaining excess water.