800W Slim Under-Seat Subwoofer Powered Car Truck Sub with Wireless Amp Kit
Specifications:
- Phase Switch: 0° or 180°
- Low Pass Filter: 40Hz - 200Hz
- Bass Boost: 0 - 12dB @ 45Hz
- Built in Subsonic Filter @ 20Hz
- THD: < 0.4%
- Fuse Rating: Single 20A
- Peak Power: 800 Watts
- RMS Power: 200 Watts
- Impedance: 4 Ohm
- Frequency Response: 40Hz - 200Hz
- Signal to Noise Ratio: >90dB
- Sensitivity: 90dB @ 1w / 1m
- Input sensitivity, Low level: 300mV
- Input sensitivity, High level: 1.0V
- Dimensions (Inches): 14.96" L x 10" W x 3.15" H
1:-GND Negative battery(BLACK )
2:+12V Connect the anode of the 12V battery( RED )
3 :REM Connect the CD machine to output 12V(BLUE)
The power can be turned on or off
Full frequency and LPF low frequency options
BASS: The BASS BOOST feature will increase the sound level in the bass frequencies
POWERP:POWERP LED
IN PUT: AUDIO-IN
FREQ:This control permits you define the frequency range, you want the subwoofer amplifier to receive the subwoofer will reproduce all sound BELOW the frequency you set.
VOLUME:
After you have installed your system, tum this controlto minimum.
Tum the head unit on( and the subwoofer will turn onvia the remote connection).Turn the head unit volumeto about 2/3 full level.
Slowly turn up the subwoofer input gain control untilyou hear a small amount of dis tortion. Then reducethe level until the distortion is completely goneLevel the control at this setting.
This amplifier bluetooth ldentification Model:wudi
