How to Use and Detect
1. Turn on both the receiver and transmitter power switches. Select the metal category using the receiver's dial—for example, press the “gold” setting for gold, and the transmitter's gold indicator light will illuminate simultaneously.
2. Adjust the receiver's sensitivity control knob to select sensitivity levels. Higher sensitivity increases the detection depth range, with a maximum range of 1000*15 meters. Adjust according to your environment.
3. Next, place the target element on the transmitter head for calibration to ensure more precise detection. For gold and silver, calibrate using the transmitter gun head; for jade, gemstones, and diamonds, use the soft calibration head. Once calibration is complete, the transmitter will emit a sound, indicating you can begin detection.
parameter:
Detection Range: 1000m
Detection Depth: 15m
Battery: 4500mAh (fully charged provides 18-20 hours of continuous operation)
Transmission Frequency: 5.6-6KHz
Signal Frequency: 360-440Hz
Weight: 3.2kg
Packing Include:
- 1 x Main unit (with LCD display)
- 1 x Receiver
- 1 x Headphones
- 2 x Chargers
- 1 x Instruction manual
- 1 x Carrying case
Note:
1. This device is best suited for field operations. Detection within urban areas is prone to interference, particularly from radio waves. Therefore, turn off mobile phones and similar devices before using the instrument.
2. Do not disassemble or modify the device.
3. During operation, avoid placing mobile phones or other metal objects near the device.
4. Optimal performance occurs within a temperature range of 0°C to 40°C and humidity levels between 10% and 30%.
5. Do not short-circuit the battery using wires, needles, or other metal objects. Also, do not store the battery with metal items like necklaces, as this may cause electrical leakage, overheating, explosion, or fire.
6. Do not charge continuously for over 24 hours. Use 220V AC power only. Note: New batteries require two to three full charge-discharge cycles to achieve optimal performance.
7. Keep away from dust and dirt, which can cause corrosion and wear parts. Regularly wipe the detector with a damp cloth to maintain its appearance. Do not use harsh chemicals to clean the product.
8. Do not place water-filled containers near the charger to prevent spills causing overheating, electrical malfunctions, or damage.
9. Avoid charging the device in these locations: direct sunlight; environments below 0°C (32°F) or above 40°C (104°F); humid or dusty areas; locations with significant vibration; near televisions or similar appliances.