• Deutsch:

•       Dieses Paket beinhaltet:

        3 Stück Nema17 17HS3404 Schrittmotor 

  1 Stück Schrittmotortreiber TB6560

• 1 Stück Schaltnetzteil 201W 24V Netzteil

• 1 Stück Breakout Board & Kable DB25

• English:

• This Offer includes:

           3 PCS Nema17 Stepper Motor 17HS3404

         1 PCS Stepper Motor Driver TB6560

           1PC Power Supply 201W 24V

         1PC Breakout Board&Cable

·       Einzelheiten/ Details: 17HS3404

Schrittwinkel	Step Angle	1,8°± 5% ° /STEP
Spannung	Rated Voltage	12 V
Nennstrom	Rated Current	0,4 A/Phase
Widerstand	Phase Resistance	30 ± 10%  Ohm/Phase
Induktanz	Phase inducturance	35 ± 20%   mH/Phase
Haltemoment	Holding Torque	0,28 Nm Min ≈ 40 oz-in
Rastmoment	Detent Torque	1,60 Ncm/Max
Drehmoment	Rotor Torque	35 g- cm²
Leitungen	Lead Wires	4
Motorlänge	Motor Length	34 mm
Wellendurchmesser	Shaft Diameter	Φ 5mm “D” Shaft Diameter= 4mm “D-cut” Length:14.3mm
Schaftlänge	Shaft Length	14,3 mm
Leitungsverbindung	Lead Connection	EN:  Black A+ , Green A- , Red B+ , Blue B-  DE:  Schwarz A +, Grün A- , Rot B +, Blau B-

·       Einzelheiten/ Details：3Axis Driver Board

Input Voltage/ Eingangsspannung	DC: 12-36 VDC
Microstep Setting/ Unterteilungsbereich	200-51200ppr(16 Microsteps)
Output Current/ Ausgangsstrom	3.5A
Input Pulse Frequency/ Impulsantwort Frequenz	0-200 kHz (.)
Signal Current
Storage Environment	-20 ℃ - +65 ℃
Humidity	Not condensation, no water droplets
Weight
Using Environment	0 ℃– 50 ℃, avoid dust and corrosive gas

   

Product Features:

 High power, maximum 3.5A drive current chipset !

 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!

 Adjustable drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different

stepper motors

 Overload, over-current and over-temperature safety - Full protection for your computer and peripheral

equipment !

 On board current switching - Power output can be set according to specific user requirement !

 Full closed-type optical isolation to protect the user's computer and equipment

 Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be

powered by this output!)

 4 channel inputs interface- Can be used for XYZ limit and emergency stop !

 Professional design - Two stage signal processing with super anti-jamming !

 Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range

without creep effect !

 Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop !

 Universal architecture - Supports most parallel software MACH3,KCAM4,EMC2 etc!

 Power supply DC 12-36V (not included)

*Voltage Selection:

12-16V DC power supply for Nema 17 stepper motors

16-24V DC power supply for Nema 23 stepper motors

24-36V DC power supply for Nema 34 stepper motors

(High voltage will burn up the chips or stepper motors!!!)

*Ampertage Selection:

Output current of the power supply can be calculated by the following expressions:

Output current = Rated current of your stepper motors * quantity + 2A

(For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power

supply is recommended, but higher power such as 24V 15A also will be good.

If you are not sure about the selection of power supply, please feel free to contact us for help)

 The power output of 12V shall be applied to the radiator fan of 12V

 Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.

 Suitable for unipolar or bipolar stepper motors.

 Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.

Einzelheiten/ Details: S-201W-24V 

 Detailed information

Spannung	DC Voltage	24V
Spannungstoleranz	Voltage Tolerance	+/-1%
Nennstrom	Rated Current	8.3A
Strombereich	Current Range	0-8.3A
Spannungsspannung	Ripple &Noise	(Max): 150mVp-p
Line Regulation	Line Regulation	+/- 0,5%
Load Regulation	Load Regulation	+/- 0,5%
Nennleistung	Rated Power	201 W
Nennleistung	Rated Powe	83%
Wechselstrom	AC Current	4,5A/115VAC  2,0A/230VAC
Anlaufzeit	Setup Rise, Hold Time	200ms, 100ms, 20ms
Vibration	Vibration	0-500Hz, 2G 10min/11 Zyklus, 60min, je Achse
Stehspannung I/P-O/P	Withstand Voltage I/P-O/P	3KVACI/P-FG: 1.5KVACI/P-FG:0.5KVAC
Isolationswiderstand	Isolated Resitor	I/P-O/P, I/P-FG:500VDC/100M W
Arbeitstemperatur / Feuchtigkeit	Working Temp. Humidity	-20°C - +85°C, 10%-95%RH
Abmessung	Dimension	215mmx115mmx50mm
Gewicht	Weight	0,83kg
Sicherheitsstandart	Saftey Standart	UL1950
EMC	EMC	FCCpart1.5J class A

 ·      Other information

Up to now, we are looking for qualified dealers with competitive prices and favorable discounts in the EU, in order to establish a mutually beneficial long-term relationship. We will try our best to support our dealers and business partners to develop more. 

·      OEM Service:

Deutsch: Wir können unsere Produkte auf Kundenwunsch anfertigen: Motorlänge, Kabellänge, Wellenmodus, Anschlussdrähte, etc.

English: We could manufacture products according to customer's requirement: Motor Length, Cable Length, Shaft Mode, Lead Wire Mode, and so on.

·      Detaillierte Informationen / Detailed Information

Deutsch: Sollten Sie weitere Bilder oder Beschreibungen benötigen, kontaktieren Sie mich bitte!

English: If you need more pictures, descriptions, manual, please contact me!

·      Zalung/Payment

Deutsch:

-       Wir akzeptieren nur die Zahlung per Paypal.

-       Die Artikel ist innerhalb von 4 Tagen zu bezahlen, anderfalls werden Sie einen Fall von eBay wegen nicht bezahlter Artikel erhalten.

-       Bitte beachten Sie:

a)Alle weiteren möglichen Einfuhrzölle, Steuern und andere Gebühren sind nicht im Artikelpreis oder in den Versandkosten enthalten. Diese Gebühren sind die Verantwortlichkeit der Käufer.

b)Bitte bestätigen Sie mit Ihrer ländischen Zoll vor dem Kauf, wieviel diese Kosten betragen.

 
-      Alle Preise verstehen sich inkl. 19% Mehrwertsteuer!

English:

-       We only accept payment via Paypal.

-       The item is payable within 4 days, otherwise you will receive a case from eBay for unpaid items.

-       Please note:

a) All other possible import duties, taxes and other charges are not included in the item price or shipping charges. These charges are the responsibility of the buyer.

b) Please confirm with your customs before buying how much these costs are.