For USA shipping addresses:
Duty & taxes will be paid by the seller. Shipping charges
are included in the order.
For shipping addresses
outside the USA:
Free
shipping, but duty & taxes are the buyer?s responsibility.
H11 Adjustable Hand Reamer 15/16" to 1-1/16" (23.81- 26.98mm) + Extension Pilot
About this item
H11
Adjustable Hand Reamer 15/16" to 1-1/16" (23.81- 26.98mm)
+
Screw
On Extension Pilot Suitable For H11 Adjustable Hand Reamer
Reamer
Adjustment is easily done with two screwed collars
which raise or lower the cutting blades by moving them along tapered seatings.
They are locked in position when the required diameter is reached.
Each reamer expands to the smallest size of next
larger size. Reamers are used for light cut, repair work, removing stock or
simply for enlarging holes. Reamers can be hand operated by use of wrenches.
The size can be adjusted by moving the blades in tapered slots by means of
loosening one nut and tightening the other Blades are ground.
Extension
Pilot
An attachment which makes easier the use of the
conventional Expanding Hand Reamer when line reaming on such jobs as king pins
and piston bushing.The Screw-0n Extension Pilot is supplied complete with a
double-taper sliding Cone Bush and replacement Collar.When using the Extension
Pilot it is essential to ensure that threads of both the Reamer and the Pilot
are clean.The method of fitting the Pilot is a simple operation carried out by
removing the front adjustment nut and replacing it with the plain collar with
the internal chamfer facing the blades.Screw on the Extension Pilot and replace
the sliding bush using either the long or short taper whichever is the more
suitable for the operation in hand.For inline reaming of two holes, seat the
tapered cone supplied into the second hole to be reamed and pass the Pilot
through the first hole and locate into the Cone and commence to ream the first
hole, to ream the second hole reverse the procedure.
Product
Specifications:
The Range of Adjustable Hand Reamers are extremely
useful precision tools for any engineering or auto-repair shop These are ideal
for use on steel or nonferrous metals The reamer blades are made from High
Quality Carbon Steel, accurately hardened Used to produce a close tolerance
surface finish over a range of diameters, ideal for maintenance and site work
