Hydraulic Seal Clasper & Seal Stretcher Rod Piston Seal Tool Glyd Ring Expander

Hydraulic Seal Clasper Description:

The seal clasper is design to push PTFE ring back into the groove of piston. Applicable outer diameter range is 50-360mm (2''-14''). Stainless steel belt can be adjusted by the size of the sealing parts. The triangle PU pad can prevent the damage from the press.

Specification:

Type:Hydraulic Seal Clasper

Material: Metal+Rubber

Size: 40*12*6cm 

Weight: 2kg

Applicable outer diameter range: 50-360mm (2''-14'')

Applicable Industries: Machinery Repair Shops, Retail, Construction works 

-------------------------------------------------------------------------------------------------------------------------------

Seal Stretcher Description:

The seal stretcher is used to expand teflon seals to get over the piston ledges. seals such as the ps1800, this tools makes the installation so much easier. Install the piston seal on the approite ledge. The nut on the top is connected to a threaded rod and this causes the expansion of this tool expands the size of the seal in a uniform manner, so it can be installed easier. This seal stretcher has the handle for easier expansion of the seals. 

The stretcher includes the following:

8 stepped segments

1 top nut/handle

one o-ring

one flat base

four screws

one threaded rod with a piston pre-installed

one stop nut

one aluminum support base

one spring

Specification:

Type: PTFE Piston Seal Stretcher

Material: Metal+Rubber

Applicable inner diameter range: 35-250mm

Maxium height: 7.5mm

Application: SEAL STRETCHER helps to install PTFE piston seals by expanding sizes.

Instructions for use:

1. Fit the rod through the aluminium support

2. Push the spring into the aluminium support

3. Screw the support onto the base

4. Install the stop nut

5. Using the O-ring to bind them, install the stepped segments and align them to the grooves on the base.

6. Hook the top under the O-ring, then push down.  Start with a few, and then add one at a time.

7. Install the top nut/handle, then make final height adjustment, if necessary.

8. Heat the PTFE seal in the oven at 248F° (120 C°) for 2 to 3 minutes.  Or you can use hot water or oil, heat the PTFE seal to 130° to 140° F (55° to 60° C) for about five minutes.  (This step is necessary to soften the seal.  Do not stretch a seal without heating it first as it will break.)

9. Fit the seal over the cone on a suitable step and press down firmly and smoothly on the handle to stretch the ring.

What's in Package:

1x Hydraulic Seal Clasper or 1x Seal Stretcher 

1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.

2. Any Customs tax applied to this package should be covered by buyers.

3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges. These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.

1. We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please contact us to resolve any issue before leaving a negative feedback.
2. Please contact us by "Ask a question".

Payment
1. Payment methods accepted : Paypal only.
2. Payment must be received within 7 business days of auction closing.

Shipping

1. We ship your orders within 1-3 business days after the payment received.

2. Item shipped via Singapore Post or HongKong Post , It takes about 7-30 business days (USA,CA,AU,UK).others country 10-20 business days(Brzil,India,RU),Exact delivery time depends on postal process.

3. If you do not receive your item(s) by 30 business days,Please feel free to contact us via ebay mail system , we will try our very best to resolve any problems with you 

Return Policy

1. Return is accepted within 30 days after the buyer's receiving the item.

2. If this item is defective upon receipt, customer has up to 14 days from date of receipt for exchange of a new one.

3. Unused/unopened merchandise will be fully credited.

Other Policies

We are not responsible for any custom duty or import tax.

If you need we write low price on shipping bill, pls leave message when you make payment .

All emails will be answered within 24 hours. If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible, Suggest send eBay message to us, That is easy to find .