Miata Cam Oil Seal Installer — Intake/VVT & Exhaust — NA/NB (1990–2005)

Press Miata camshaft seals straight and even without guesswork. Purpose-built drivers for Intake (VVT & non-VVT) and Exhaust cam seals on NA (’90–’97) and NB (’99–’05) MX-5s.

Why You’ll Like It

• Correct Fit: Profiles match Miata B6 (1.6) and BP (1.8) cam seal bores

• Square Seating: Draws the seal in evenly to prevent leaks and premature wear

• Two Lengths Available:

  • Short Driver: Exhaust (’90–’05) and Intake non-VVT (’90–’00)

  • Long VVT Driver: Intake VVT (’01–’05)

• Easy Operation: Tighten with the cam bolt or tap gently with a mallet

• Durable 3D-Print: High-strength PLA+ (color may vary)

• Designed & Printed in the USA

Compatibility

• Chassis: NA6 (1990–1993), NA8 (1994–1997), NB (1999–2005), incl. Mazdaspeed (2004–2005)

• Engines: 1.6L B6, 1.8L BP (BP-ZE/BP-4W/BP-Z3 VVT)

• Also May Fit: BP-family applications such as some Ford Escort and Kia Sephia/Spectra (T8D)—verify dimensions before purchase.

How To Use

1. Prep per factory service manual; lightly oil seal lip and bore.

2. Place the tool against the new seal; install cam bolt.

3. Tighten slowly to push the seal in square (or tap lightly to correct tilt).

4. Stop when seal is flush with the bore—verify even seating all around.

Important: No built-in depth stop. It’s your job to stop at flush. Always follow the service manual.

What’s Included

• (1) Cam Oil Seal Installer — choose Short (Exhaust/Non-VVT Intake) or Long (VVT Intake)

• Quick start instructions

Notes

• COLOR YOU RECEIVE MAY DIFFER FROM PHOTOS.

• Cosmetic layer lines are normal and do not affect function.

• Keep away from high heat/solvents; for installation only.

Keywords
Miata cam seal installer, MX-5 camshaft seal tool, VVT intake cam seal driver, Miata exhaust cam seal tool, NA NB cam seal, BP cam seal installer, B6 cam seal driver, Mazdaspeed cam seal tool, Ford Escort BP cam seal, Kia T8D cam seal.