🔺Tips

This "Buy 3 get 2 free" campaign requires you to add 5 items to the shopping cart and then pay together.  
eBay will automatically calculate the discount, you only need to pay for 3 pieces.  

🔺For example
If you want to get 5pcs, please add 5pcs to cart. And you only need to pay for 3pcs.
If you want to get 10pcs, please add 10pcs to cart. And you only need to pay for 6pcs.
Filament Printing temperature Bottom plate temperature Printing speed Wire diameter Weight
TPU 195-205°C  50-60°C  20 - 40mm/s 1.75 ± 0.03 mm
 0.5kg=165m
TPU-SILK 210-220 °C  30 - 50mm/s  1.1kg
WOOD - 60-65°C 

195-205℃ 50-100mm/s

205-215℃ 100-150mm/s

215-260℃ 150-400mm/s
SILK 205-215°C 
 50-60°C  40 - 60 MM / s 1.75 ± 0.02 mm
Dual-Color SILK -

205-215℃ 50 -100mm/s

215-230℃ 100-200mm/s
Tri-Color SILK
PLA 200-210°C  50 -100 MM / s
PLA Matte 205-215°C 
PLA Golw in the dark 195-205°C 
PLA+ 205-215°C
PLA+ 2.0 -

195-205℃  50 -100mm/s

205-220℃ 100-300mm/s
PLA Meta 185-195°C  50 - 150 MM / s
High Speed PLA -

190-210℃ 50-150mm/s

210-230℃ 150-300mm/s

230-260℃ 300-600mm/s
PLA Carbon Fiber 215-225°C 40 - 60 MM / s
PETG 220-230 °C  60-70°C 
EABS 225-235°C 1.75 ± 0.03 mm
 1kg
ABS 250-260°C 80-100°C 
PVB - 50-60°C 
200-210℃ 50-100mm/s
210-230℃ 100-200mm/s
Antistring PLA
-
205-215℃ 50-100mm/s
215-245℃ 100-230mm/s
 1.75 ± 0.02 mm
 1.1kg
ASA - 90-110°C 
250-260℃ 50-100mm/s
260-280℃ 100-200mm/s
 1kg
PLA Classic - 50-60°C 

190-210℃ 50- 150mm/s

210-230℃ 150-300mm/s

230-260℃ 300-600mm/s

 1.1kg
High Speed PLA+ -

200-215℃ 50-150mm/s

215-230℃ 150-300mm/s

230-260℃ 300-600mm/s
High Speed PLA+ 2.0 -
High Speed Matte  PLA -

190-210℃ 50-150mm/s

210-230℃ 150-300mm/s

230-260℃ 300-600mm/s
High Speed Matte PETG -  70-80℃

205-215℃ 50 -100mm/s

240-250℃ 100-300mm/s

260-270℃ 300-600mm/s
Not neatly wound but tangle free filament: PLA Marble / ABS / TPU
Spool Size 
650G Filament Cardboard Spool 250G Filament Spool   
1.1KG Filament Spool 500G Filament Spool

Tips:

  1. Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.
  2. Be sure to insert the free end of the PLA+ filament into the holes to avoid being tangled for next time use.
  3. If there is no print plan within a few days, retract the filament to protect the printer nozzle.
PushAuction

On Feb 3, 2026 at 01:19:15 PST, seller added the following information:

Datacaciques