Specifications:

• Brand: OKMO
• Name: M18 Gasoline Engine Model Stirling Water-cooled Cooling Structure With A Cooling Water Tank And A Circulating Gear Pump
• Size: 76*68*110MM
• Displacement: 1.6CC
• Cylinder Diameter: 13MM
• Itinerary: 12MM
• Weight: 1100G

Features:

Engine startup steps

• Check the wiring of the engine from the bottom plate, install three AA batteries(4.5v).Fill the water tank with water.
• Unscrew the screw of the fuel tank. Fill the fuel tank with gasoline(95#).When the filling is completed, press the carburetor port by hand on the right side of the engine, and turn the flywheel clockwise for many times. Its function can make the mixing The fuel fully enters the fuel pipe.
• Turn on the power switch and quickly turn the flywheel clockwise and counter clockwise on the right side of the engine to start the engine.

Precautions:

• When the ignition device is normal and the cylinder compression is normal, if the machine cannot start normally, it is very likely that the carburetor oil needle needs to be adjusted.
• After tightening the main oil needle on the carburetor, loosen a 1/4 turn and start the flywheel, so that the mixing ratio gasoline and air can reach the normal working mixing ratio after several times.
• When the machine stops, turn off the power switch. Open the fuel tank screw and draw out the fuel.

Note: 

• Please understand the product might have some colour difference due to different monitors and scenes.
• Please allow slight deviation for the measurement data. 

Package included:

• 1x M18 Gasoline Engine Model Stirling Water-cooled Cooling Structure With A Cooling Water Tank And A Circulating Gear Pump