Liquid Patch is a fibre based puncture sealant, which immediately and permanently protects both tube and tubeless tyres against punctures in the tread area up to 6mm (1/4″) in diameter. The repair occurs while you are driving and is permanent. Liquid Patch is also environmentally friendly, non flammable and non hazardous.
Product Details:
- Product Type: Liquid Patch Type Sealant
- Capacity: 20 Litre
Average amount of Liquid Patch required per tyre:
-
Bicycles, Golf Carts, Wheelchairs:125ml
-
Farm Trailers, Ride-On Mowers:250ml
-
Cars, Caravans, Car Trailers:500ml
-
4WDs, O -Road:750ml
-
Recreational Vehicles:750ml
-
Trucks and Vans:1000ml
Feature:
- Dual Use Tube & Tyre Sealant
- Fill and forget System Seals while you Drive
- Automatic Puncture Protection
- New Safety Lock Cap
- Features Built-in Valve Removal Tool and Fill in Tube
- Seals punctures by objects up to 6mm diameter
- Suitable for tubed or tubeless tyres
-
Cars
-
4WD’s
-
Trucks
-
Trailers
-
Push Bikes
-
Motor Bikes
-
Caravans
-
Wheel Chairs
-
Ride On Mowers
-
Golf Carts
-
Farm Equipment
Directions for use:
-
Note: Never to be diluted. Can not be used with any other sealant.
-
1. Rotate tyre so valve stem is at either 4 or 8 o’clock.
-
2. Shake bottle well, then twist cap anti-clockwise and pull to fully extend filling tube.
-
3. Remove cap using built-in valve core removal tool.
-
4. Insert cap/valve tool into valve and turn anti-clockwise to remove valve core and fully deflate tyre.
-
5. Slide filling tube over valve stem and slowly squeeze your required amount of sealant into the tyre, as per the above method. (W x H x .5 = required mls).
-
6. Re-install the valve core using the cap tool, turning clockwise. Do not over tighten.
-
7. Inflate tyre to the manufacturer’s recommended pressure.
-
8. For optimum results, rotate the wheel multiple times to coat the tyre and activate seal.
-
9. Rinse bottle and dispose into a recycling bin.
On 24/07/2025 at 12:15:24 AEST, seller added the following information: