Welcome to our ebay store. Happy shopping
Store Categories
Why Choose us
  • Free Shipping
  • Fast Shipping Within 24 hours
  • 30 Day Money Back Guarantee
  • Trusted Store Satisfaction Guarantee
  • Secure Shopping With Confidence
  • Best Price and Good Quality
  • Professional Customer Service
For Chevy Camaro Corvette Buick Pontiac Door Latch Shaft Extension Window Crank
Items Description

Universal Window Crank Shaft Extension and Door Latch Shaft Extension.

Detail information :
 
1.How to install
   First , Remove stock door handle(s) and remove the armrest and door panel as required . Install crank shaft extension over existing shaft and tighten set screw(s) with a 1/8" hex head, allen wrench to 72-75 inch pounds (We recommend using Blue Lock-Tite on the set screw to prevent it from backing out )
   As a note : the set screw is made of  steel with at cone point for the best possible holding capacity. With proper torque the pointed end of the set screw(s) will bite to the steel shaft and ensure it won't loosen up over time  
   Next,  re-install the door panel and push door handle on to the  shaft extension. Check to ensure the clip is engaged into the groove on the shaft extension.
    This product will extend your door handle shaft by 5/8" (tolerence is 0 to + 1/16") depending on the length of your existing shaft. If you need another 1/8" to 1/4" don't bottom out the extension on the original shaft when installing the extension and or if you need a little less extension, you can grind down the existing shaft to about where the groove for the c-clip would go ... just be sure the set screw will properly engage the original shaft then install the extension.
 
2.Fitment:
     Fits most 1950-1990 General Motors Products (Chevy, GMC, Pontiac, Buick, Olds, GM and Chevy Trucks, Camaro, Corvette, Cadillac) and many other domestic cars and trucks  ( Jeep, Dodge, Chrysler cars and and even imports like Toyota, Mazda, Nissan, Honda, Subaru, Hyundai, Mitsubishi, ...) with at ~1/2" diameter splined shaft on the window regulator (GM Spec for shaft diameter is .41 to .46 depending on whether it is a window crank, door latch release, wing vent crank or door lock... Our product fits most of them), 16 spline shaft in which the window or door handle is attached to the shaft with a "C" clip as depicted in photo # 2 and #3 of  this offering.
 
3.Return:
  If you return the item and the reason is "Too Long" I will charge a 20% fee for processing. I find that people are not reading the details of the product and expect a 1/4" extension which is impossible to make and it's costing me a lot of money. I can't be more upfront about the length of the extension.
 
4.Warranty
     Lifetime Warranty :  Tested, proven product. We conduct random VT and PT testing of our  weld process to ensure the  welds are  adequate. Additionally, we conducted destructive testing by inserting  a 24" steel pipe over the extension and attempted to break the welds... the result was, we twisted and destroyed the window regulator and the splined shaft remained attached to the tubing as designed. That is why we offer a LIFETIME warranty on our material and quality craftsmanship.
 
Any questions ,welcome to conatct with us !
 

All Items will be shipped to buyer's Paypal confirmed Address.

We only ship to the confirmed address provided by PayPal. Please make sure your address in PayPal matches the shipping address. Please make sure your PayPal address is up-to-date.

All items will be shipped within 24 business hours upon receipt of payment (except Saturday and Sunday).
If you do not receive your item on time, please contact us immediately for further assistance. We will track the shipment and get back to you in 24-48h with a reply.

We accept payment by PayPal,PayPal Credit ,Credit Card or Debit Card,Apple Pay,Google Pay!

Payment should be completed within 7 days after buyer places the order or else an unpaid case will be opened in order to cancel the transaction. If you can not pay in time, please contact us.

Please leave us a good rating after you have received the item and are happy with our transaction.

If there are any issues, please contact me at the first time .We will deal with it in time.

If you encounter any problems about anything, please feel free to contact us and we will do our best to assist you solve the issue. If you are not satisfied in anyway, please feel free to let us know and give us a second chance to correct it before you decide to leave any neutral or negative feedback.Thanks!

Motorcats7 is a professional suppliers in automotive field, we can provide the best products with best quality, 100% customer satisfactory is always our goal.

Our Products are manufactured in ISO 9000 /TS16949 certified facilities. the products deliver the look, feel, fit and performance of OE. Manufactured with an OE design, simple installation and and long life as a guarantee.

Store Home | New Arrival | Ending Soon | Add to Favourites | View Feedback | Contact us
Copyright © 2020, AFA-Motors All Rights Reserved

DataCaciques