BANVIE Car Immobilizer Transponder Bypass Module for Chip Key, a Spare chip Key is Required, not fit for Other Immobilizer Way
It is a bypass module to bypass the chip key only, please note this one is not a remote starter!!! Security design for chip key immobilizer, ONLY compatible with most cars with CHIP KEY, will not work for other immobilizers.
How to install the bypass module?(Please note a spare key is required to go inside the Box, if your original key is too big, please open it to get the chip unit )
Some cars have RFID car key (chip key), if you want to remote start car, you need to have a bypass module, otherwise the car engine can’t started.
Main Steps:
1) Remove the key screws of bypass module control box, open the control box;
2) Insert the OEM car key or key PCB or Key chip under the wire;
3) Lock the locker and press the wires close to the remote key, or key PCB or Key chip;
4) Tighten the screws and lock the case;
5) Circles the sensing the wire on the OEM car key socket(circle more circles can enhance the signal;
6) Fasten the sensing wires to the car key socket with glue;
7) Try to start car engine to confirm the bypass module working, if it is not working, please try circle sensing wire more circles on the car key socket, or check the connection if it is right;
8) Place the bypass module in a hidden place.
