|
TECHTONGDA® |
|
Commercial Stainless Steel Vegetable Water
Thrower Dehydrator Adjustable Speed |
| This
machine is suitable for vegetable dehydration. It has beautiful
appearance and convenient operation, large volume, high efficiency, low
energy consumption, continuous cleaning, simple operation, and long
service life. The material barrel and box are made of high-quality
stainless steel material, which is not rusty and clean. |
|
 |
| Material |
High quality
stainless steel |
| Voltage |
110V |
| Power |
0.75KW |
|
Diameter of the inner tank |
11.02in(28cm) |
|
Diameter of the outer tank |
16.54in(42cm) |
|
Gallbladder height |
11.8in(30cm) |
|
Processing efficiency |
2.5-6kg/each time |
|
 |
 |
| |
|
Product Features and Functions |
| 1. This product has
exquisite design, simple and reasonable structure and high work
efficiency. All parts that come into contact with food are made of
stainless steel or with special surface treatment, in line with national
hygiene standards. 2. Easy
to use, flexible and convenient operation, high production capacity:
(Put the cut block materials into the bucket, run for about 1-2 minutes
to dehydrate, and can also be used continuously, such as soy milk
removal, etc.).
3. The machine is made of high-grade
stainless steel, which is hygienic and durable, and can be used for
soymilk removal, dehydration, oil removal, vegetable water removal,
etc., which is simple and practical.
4. This series of dehydrators are
widely used in hotels, restaurants, restaurants, and food processing
plants. And the canteens of each unit need to desizing, dehydrating,
de-oiling, de-vegetable water, etc. when making food. |
|
Description |
1. Check that
the power voltage meets the specified requirements, the power wiring
should be firm and reliable, and the power socket should be firmly
grounded.
2. Place the vegetable dehydrator on a level surface.
3. Place the vegetables that need to be dehydrated in the dehydration
box. Before dehydration, please manually evenly place the vegetables in
the dehydration box to prevent equipment shaking due to imbalance.
5. Turn on the power, set the dehydration time as required to 1-5
minutes, and start the machine,.
6. Open the upper cover and remove the dehydration box and the processed
product.
7. After completing the work, open the upper cylinder cover, remove the
dehydration frame, and clean the inside of the material barrel. |
|
Note |
1. Do not
put your hands or other foreign objects into the bucket to avoid injury
or damage to the machine.
2. This machine is equipped with a motor overload protection device. In
the event of overload or blocked rotation, the motor is automatically
cut off from power. When the motor cools down to a point where there is
no burning sensation when touched by hand, the motor thermal protection
switch resets, providing safety protection for the motor.
3. If the machine is operating normally and there is no wastewater or a
small amount of waste residue coming out of the drainage pipe, the
drainage pipe is blocked and only needs to be unblocked.
4. If the power cord is damaged, in order to avoid injury, please make
sure to have the manufacturer, its agent, or relevant professionals
replace it.
5. This machine is not suitable for individuals with physiological
defects, disabilities or intellectual disabilities (including children),
or lack experience and common sense, unless there are relevant
regulatory personnel supervising or guiding the operation to ensure
their safety.
6. Be careful not to let children play with this machine.
7. This machine cannot be cleaned with a water spray.
8. Clean the machine correctly.
9.Before using the filter
bag, please clean it thoroughly before use. After each use, it is
necessary to clean it thoroughly before storage. |
 |
 |
 |
 |
|
Precautions and safety rules |
|
☆We do not
assume any responsibility for failures and accidents caused by improper
use by users.
☆It is forbidden to use oversized solids and other hard and overweight
bulk materials for dehydration.
☆To ensure the safety of electricity use, it is necessary to regularly
check the cable and whether the circuit is in good condition. It is
forbidden to use when the insulating layer of the relevant circuit is
damaged.
☆The grounding of the dehydrator must be good, and it is strictly
forbidden to operate the machine with bare feet and wet hands. When the
machine is just started or gradually suspended, the body needs to be
supported to prevent the machine from swinging too much and causing
accidents.
☆When the dehydrator is working, or the power supply has been cut off
but the sieve is still rotating, it is strictly forbidden to use hands
or other tools to enter the sieve to get the material.
☆In case of excessive load, lumpy materials or uneven distribution of
materials, the machine is caused to work abnormally due to excessive
shaking force. First, quickly stabilize the machine and then cut off the
power supply (to prevent the machine from falling and causing a safety
accident) ), if it is overloaded, you should slowly take out a certain
amount of block materials in the sieve (in line with the rated working
weight of the machine) before continuing to work. If the material is
uneven, the material should be placed flat again, and then the machine
should be turned on for work.
☆When the dehydrator is not used for a long time, be sure to disconnect
the power supply, and use waterproof, moisture-proof, dust-proof and
other protective measures
☆When the machine is working, it is forbidden for children to play near
the machine to avoid safety accidents.
|
Shipping & Handling Details |
|
Default Shipping Cost or Free Shipping
Information:
▲ Default shipping cost or free shipping service is only
for the lower 48 United States by UPS Ground
or USPS. Other areas or needs other shipping
ways, please contact us.
▲ Buyers from Guam, Puerto Rico, Virgin Islands,
American Samoa, Alaska, Hawaii, PO Boxes,
APO/FPO addresses or other countries/areas, there
WILL be extra shipping costs, please contact us
for more detailed information.
▲ Please make sure your address is valid for both UPS
and USPS services. Any costs incurred
because of incorrect or undeliverable address
should be undertaken by buyer.
Handling Time: Shipping
is usually made in 1-3 business days after payments
cleared. Orders are processed
from Monday-Friday; Not on the weekends & public
holidays.
Sales tax / Customs duties: Any
sales taxes or Customs duties are not included. If came
out, they must be undertaken by the buyer.
Damage In Shipping: Email
or call us First! We will work with you to get the case
resolved in the fastest method. |
|
Return
/ Refund |
|
If
you are not 100% happy with your purchase,
please contact Us. Please don't directly
opened a request or case without informing us, or else,
we will do some discounts on the warranty
and other sales-services later on. Hope for
your understanding.
Returns & Exchanges
▲ All
returns must be made within 30 days of
delivery date. Items must be in new, unused
condition, with all original materials included with the
shipment. A partial refund may be applied
for opened or damaged items, depending on
the condition.
▲ Items returned under the buyer’s remorse: The return
shipping fee must be covered by the buyer;
The original shipping cost will also be
deducted from the refund. 15% restocking fee of the
items purchase price will be charged.
▲ Returns that are the result of our seller's error:
Buyer will receive a full refund of the item
as well as shipping charges
▲ All returns require a RA (Return Authorization) number
that will be given by our seller. Please
contact with us at first for more details.
Defective & Damaged Products
▲ If product was received damaged or not as described,
please send us some pictures or videos, so
we could well understand your problem, then
solve them for you ASAP. Besides, it's much helpful for
us to claim with UPS, remind our related
department to pay much more attention to
packaging later on. Hope for your understanding.
▲ Replacement or refund of defective or damaged products
can only be returned in exchange for the
exact same product, or else, the purchase
price will be refunded back to your original payment
method.
▲ If an item is received damaged, customer service must
be contacted within 7 days of receiving your
item. All returns require a RA (Return
Authorization) number as above. |
|
Warranty & Feedback |
|
▲ 6
months' warranty for the machines, not for the
consumables. We stand behind our products
all the item, so even if your warranty period has
expired, you can still seek for service or technical
support from us with low cost.
▲ Any
warranty shipping cost to us is responsible by buyer.
▲ Any shipping cost to buyer is responsible by the
seller.
▲ We
committee to the customer satisfaction and want to
bring you the best purchase experience. If
there is any problems, please contact us ASAP. If
not, please leave us a positive feedback as it's
very important for us. Thanks very much. |
|
|