Digital Gold Density Meter Gold Karat Tester Machine Gold Purity Analyzer
Notes: Printer is optional, please contact me if you need it.
Notes: Please be noted that the machine has limited function which is determined by its' principle.
Following gold type can't be tested:
(1) Gold has any decoration.
(2) Gold has the painting.
(3) Gold inside is hollow.
Application:
-
Pawn broking, bank, jewelry shop, precious-metals recovery, jewelry factory, Gemstone Testing Center,precious metals researching.etc.
-
In accordance with archimedes principle water buoyancy method, GB/T1423 of precious metals testing standard,and so on.
-
Combine archimedes principle with micro electronic technique;adopt sensor imported from Germany,the purity can be calculated through measuring density of precious metals.features of no damage on sample;simple operation,fast and accurate.
-
K value of gold, PT value of platinum, density value, purity percentage can be measured.
Features :
-
The purity of gold,platinum,and other precious metals can be measured in a short time.the fake can be distinguished.
-
No damage testing, cleaning and environmental protection.
-
Measuring just need 15 seconds,convenience,stabilization,and accuracy.
-
Multi-mode,gold mode,platinum mode,other precious metals mode can be shifted.
-
Multi-function;the purity of other precious metals can be measured.such as tin,copper,silver.,etc.also can be used as precision balance.
-
Function of top and bottom limitation;it can display"OK,HI,LO" in the state of qualified,exceed,less;Prompt alarm.
-
Function of automatic zero tracking,buzzer warning,and overload warning.
-
Function of solution compensation.necessary if liquid other than water is used as a medium for measurement.
-
Adopt the completed high-capacity transparent injection mould sink,which can resist damage and corrosion.
-
Adopt the completed special windproof and dustproof cover,which is convenient and durable.
-
Interface of RS-232C is included.the machine is available to connect PC with printer ( printer is optional ).
Specifications:
-
Density resolution: 0.001 g/cm3
-
Maximum weight:600g
-
Minimum weight:0.005g
-
Measurement time:15s
-
Testing board:Completed high-capacity plastic testing board
-
Measuring type:Traditional gold and platinum jewelry,necklace,bracelet,ring,large bullion,craft,and gold,silver,copper,cadmium,nickel,tin.etc.
-
Gold mode:
-
Display k value:The K value of mixture ofgold,silver,and copper;mixture of gold and copper;mixture of gold and silver;
-
Display purity percent:The purity content of mixture of gold,silver and copper; ;mixture of gold and copper;mixture of gold and silver;
-
K value range:9K~24K
-
Copper and silver proportion setting:Cycle seting as user’ prefer(default 7:3)
Platinum:
-
Display value :PT percent,density value,volume
-
PT value range :Pt600 - Pt1000
-
Measuring container:completed injection forming transparent professional measurement tank (size: length 16.9mm×wide 9.8mm×high 8.3mm)
-
Parameter setting:water temperature setting,measuring medium density setting
-
Principle:Archimedes principle
-
Memory method:Two procedures
-
Correction method:auto correction with one button,auto detection.
-
Output method :output and print testing data conveniently with standard communication interface of RS-232C.
-
Power:AC100V - 240V
-
Main features :Simple operation,digital display,accurate measurement,stable,durable
-
Measurement Procedure
-
Measure the gold weight in air,and then press the ENTER button to memory.
-
Place the gold into water to measure the weight,and then press the ENTER button to memory.show the K value of gold,purity percent,density value.
Standard Accessories:
-
Host
-
Sink
-
Test board
-
Tweezer
-
Weight
-
Wind and dust cover
-
A set of measuring particle parts
-
A set of measuring floating body parts
-
Power transformer