2'' 52mm Clock Gauges 0-12Hours Show Clock Meter with Red Backlight for Car Boat

52MM Black Universal Clock Gauge Red LED for Car Truck Marine Waterproof 12V/24V

 


Description:

  • Fit For: Car Boat Truck Motorcycle ATV UTV Marine 
  • Face Color: Black
  • Bezel Materials: Stainless Steel
  • Operating Voltage: 9-32VDC
  • Operating Temperature: -30~+75 ℃
  • Install Diameter: 52mm(2-1/16'')
  • Grade Of Protection: IP67

Features:

  • - 100% Brand new and high quality.
  • - Excellent anti-fogging performance.
  • - 316L Stainless steel bezel with curve glass.
  • - Easy installation with multi-plug socket connection design.
  • - Black Ground Design With Red Backlight
 
  • Instrustion (how to use the button to set time ):
     
  • 1、Short press the button to adjust the time with 1 minute per step
  • 2、Hold the button (time≥3 seconds)，the pointer will sweep as clockwise direction , please release when the needles point at the position required. (The moving speed of the minute will be fastter and faster as time goes by )

CLOCK: Please Connect the red clock holding wire, the clock wire isconnected to the positive pole of the red battery, or the clock will be reset.
 


Installation instructions:
 
  • 1.Opening a hole in the panel (your cabin board and dashboard) with a diameter of 52mm,Insert meter into the hole,The panel corresponding to the instrument panel is marked with a convex table,and open a small notch in this location,To ensure that there is at least 70mm of the instrument panel at the back of the instrument.
  • 2.After the instrument is mounted in the panel,Screw down with a fixed ring.
  • 3.Connect the wire,the instrument housing is directly connected to the 9~32V power supply.
  • 4.Insert wire harness,Firmly locked in the table.

 
Connection:

  • Red-- +9-32VDC
  • Black--Setting time
  • Orange--Blacklight(+)
  • Blue--Ground(-)

Package List:

  • 1x Clock Gauge
  • 1x Wiring Harness
  • 1x Instruction Manual
PushAuction