This item has been printed under license by StationForge.

Contains 10 models.

32mm - optional extra - if you require different sizes then please let me know

printed in 8k using a custom mix of abs like resin and flexible resin to increase its impact resistance, all items will be washed and cured prior to being sent. Due to the item being made from UV Resin exposure to sunlight will continue to cure the model and may cause the model to become brittle. Recommended to avoid exposure to sunlight and paint in order to prevent the models from over curing.

Optional Bases will be Printed in either black or grey filament using an FDM printer.

Items sent have had their printing supports removed, there will be signs of support scarring on items and an element of model clean up will be required by the purchaser. Suggested tools to do this: sandpaper, sanding sticks, hobby knife.

Some items come in multi parts, these items will require to be glued together. As with most models seams maybe visible and products like green stuff or milliput is recommended to hide these connection points.

32-34mm - approx from base of foot to eye level

This item is not a toy and is not suitable for persons under the age of 16. Care is to be taken when preparing and handling resin products, correct PPE should be used in order to prevent inhalation of dust caused by sanding items. Resin products can break and have sharp edges, under no circumstances is resin to be ingested.