A special product from the LITHOFIN-Range for marble and natural stone (MN). Solvent free emulsion based on natural waxes, high quality polymers as well as cleaning and self-glossing additives.
Properties:
Lithofin MN Care-Sheen forms an easy-to-polish protective film and enhances the appearance of the surface by slightly intensifying the colour structure.
Technical Data:
Density: approx. 1.0 g/cm³
pH-Value: approx. 9
Appearance: liquid, whitish
Odour: pleasant
Flash Point: n.a.
Solubility in Water: very good
Field of Use:
For touching up and protecting polished marble and granite floor surfaces, which have become matt or dull. Lithofin MN Care-Sheen contains cleaning substances and can be used for regular maintenance on surfaces subject to low levels of wear and tear. Also suitable as an initial treatment of rough and honed surfaces where a satin gloss is required. For indoor use only.
Directions for Use:
When using Lithofin MN Care-Sheen as an initial treatment, dilute the product 1:1 with water and apply it to the surface with a clean cloth or sponge. After approx. 30 to 40 minutes the surface can be polished by hand or machine. For touching up and maintenance use one cup of Lithofin MN Care-Sheen per 10 litres of wiping water. On worn surfaces use a bit more. Do not walk on the surface until the product has dried.
Coverage:
Approx. 200 m²/L when used in wiping water, approx. 20m² when used undiluted.
Advice:
Natural stone floors should be wiped regularly. Especially on polished marble, we recommend using Lithofin MN Wash & Clean or Lithofin EASY-CARE for three or four washes and then using Lithofin MN Care-Sheen once.
PLEASE NOTE: Images for illustration purposes only.