UV-Protection-Oil Extra
NATURAL UV-PROTECTION FOR VERTICALLY STRUCTURED WOOD
- Highly water and dirt resistant
- Contains active ingredients to protect the coating against mould, algae and fungal attack
- Clear and transparent colours available
- Microporous, penetrating finish which does not crack, peel or flake
- No sanding necessary when topping up coating
- Delays natural greying by 12 times in comparison to untreated wood
Clear, satin wood finish based on natural oil for wood
in outdoor areas. Microporous surface allows the
wood to breathe and reduces swelling and shrinkage.
Water-repellent, will not crack, peel or flake.
As top coat on already colour treated wood, Osmo
UV-Protection-Oil Extra prolongs the renovation intervals significantly. As a single product application, it
blocks the greying process on vertical surfaces with
a UV protection factor 12 in comparison to untreated
wood when two coats are applied.
Osmo UV-Protection-Oil Extra is furnished with active
ingredients to protect the coating against mould,
algae and fungal attack. Simply apply without sanding.
Easy and seamless application. Finish stays workable
while coating.
Osmo UV-Protection-Oil Extra is ideal for all vertical
wood surfaces in outdoor areas: doors, windows,
window shutters (dimensionally stable elements), carports, timber cladding, balconies, fences, pergolas,
and summer houses (dimensionally unstable elements). Also suitable for bamboo poles (e.g. in
screens).
- Application tool: Flat Brush or Microfibre Roller
- Recommended use: Vertical wood surfaces in outdoor areas
- Recoat: One coat, when signs of wear become visible
- Dry time: 12 hours
- Coverage: 18m²/L with one coat
- Coats: 2 coats
- Care: Osmo Spray Cleaner (Exterior)
- Recommended: Oak, Beech, Ash, Alder, Birch
- Thermowood and Thermally Modified Timber (TMT): Prone to grey quickly, application is recommended within the first 2 weeks after processing.
- Recommended after applying WR Base Coat: Accoya, Kebony, Pine, Spruce, Douglas Fir
- Recommended after 2-6 weeks weathering: Larch (WR Base Coat recommended before use)
- Recommended after 3-4 weeks weathering: Sapele
- Recommended after 12 weeks weathering: Cedar, Iroko, Mahogany, Teak, Walnut, Ipe, Merbau, Wenge, Rosewood, Sycamore
- Not recommended: Green Oak, Idigbo
- Woods treated with varnish, lacquer or other surface coating must be sanded before use
PLEASE NOTE: Images for illustration purposes only. You will receive 4 x 3L tins.