OURANTOOLS Dual Modes EVAP Smoke Machine

Smoke Mode: Our Leak Down Detector can generate smoke in about 30 seconds, quickly help you detect if leak exist and how big the leakage is by the changes of the powerful pressure gauge. Saving a lot time cost.

Air Mode: There is flow-meter from 1 to 6 to adjust the smoke concentration grade, which precisely locates these small (Even 0.25 mm small leakage can be tested ) and hard to find leaks to avoid unforeseen accidents.

Don't Rely on Other Air Supply Device - Reducing Diagnostic Time & Saving Money

The Portable Leak Down Detector built-in independent air pump means you don't need to buy additional air supply machine, just connect the detector with DC12V battery, then it will work and generate smoke in seconds.

The EVAP Smoke Machine Leak Detector equipped with adjustable flow meter to control the size of smoke output.

Universal Leak Down Detector for Various Pipe Systems

The EVAP Smoke Machine is designed to be a universal leak pipe systems detector for all vehicles. It can do smoke leak test of various systems, such as EVAP Systems, Intake Systems, Cooling / Exhaust / EGR Systems, Crankshaft Systems, Fuel Tank Systems, Engine Air-tightness, Vacuum Leaks, Low Pressure Turbo Leaks.

Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with auto diagnostic tool, you can find the vehicle problem accurately and diagnose fault, equipped several kinds of connectors almost meet all your needs.

It is a ideal Smoke Leak Detector for Home DIYERS!

Dual Modes

 

  • Smoke mode button is to control the smoke generator independently, generate smoke faster than last generation, reducing diagnostic time.
  • Air mode button is to control the air pump independently, adapt smoke grade to locate the small and hard to find leaks.

 

Safety Ahead

High temperature resistant material body & Tight sealed conveying piping and built-in overheat protection to ensure safe and easy management.

How To Use

 

  • Step 1: Fill proper test oil into the detector
  • Step 2: Disconnect these pipes that need to be connected with detector
  • Step 3: Connect detector with DC 12V battery
  • Step 4: After pipe filled with smoke, check leaks by the changes of pressure gauge changes

 

NOTES: Both mineral oil and baby oil are OK, oil is not included.

Package List

 

  • 1* Smoke Detector Main Unit
  • 1* Power Cord Clamp
  • 1* Smoke Hose
  • 1* Standard Cone Adapter
  • 1* Hard Rubber Kits
  • 1* 30ml Test oil Refill Bottle
  • 1* Valve Cord Wrench
  • 1* Universal Airbag Adapter
  • 1* EVAP Special Connector
  • 1* English User Manual

 

 

Warm Notes:

 

  1. - In first time use, please fill with 10ml test liquid into the car smoke leak detector. Both liquid paraffin and baby oil are OK, but please NOT to beyond this range of 10ml.
  2. - Before filling fresh oil, please pour out the oil left in the detector. The fresh oil can be filled with only when the smoke gets thin, can’t be filled over 20ml each time.
  3. - During the process of leak detection, must keep away from smoke-sensitive parts. Please be careful with the round part of the leak detector with high temperature to avoid burns hurt.
  4. - Do NOT use the leak detector over 8 minutes continuously. Once the high temperature protection mechanism triggered, please make it interval rest and operate later.

 

About Maintenance:

With longtime high temperature work, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly.

 

  • Before filling new oil, please pour out the remaining oil in the detector
  • When the smoke output has water drops, please replace with new oil
  • Liquid paraffin and baby oil are OK. Please fill new oil with equipped oil bottom

 

Specification:

 

  • Output Pressure: 0-15 PSI
  • Output Flow: 1-6 L/min
  • Air Pressure Output: Built-in air pump
  • Power Supply: DC 12V battery
  • Fluid Capacity: 40mL
  • Package Weight: 4.2kg/8.82 lb
  • Main Unit Dimensions: 210x135 x110(mm)/8.26 x 5.31x 4.33 inch
  • Package Dimensions: 277x220 x255(mm)/10.9 x 8.66x 10.04 inch
PushAuction